Abstract:With the advantages of a high theoretical capacity, proper working voltage, and abundant reserves, silicon (Si) is regarded as a promising anode for lithium-ion batteries. However, huge volume expansion and low electronic conductivity impede the commercialization of Si anodes. We devised a one-step, vacuum-assisted reactive carbon coating technique to controllably produce micrometer-sized nanoporous silicon confined by homogeneous N-doped carbon nanosheet frameworks (), achieved by the solid state reaction of a commercial bulk precursor and the subsequent evaporation of byproducts. The graphitization degree, C and N contents of the carbon shell, as well as the porosity of Si can be regulated by adjusting the synthetic conditions. A rational structure can mitigate volume expansion to maintain structural integrity, enhance electronic conductivity to facilitate charge transport, and serve as a protected layer to stabilize the solid electrolyte interphase. The anode enables a stable cycling performance with 95.68% capacity retention for 4000 cycles at 5 A g–1. Furthermore, a flexible 2D/3D architecture is designed by conjugating with MXene. Lithiophilic homogenize Li nucleation and growth, evidenced by structural evolutions of @NCNF deposited Li. The application potential of and @NCNFs is estimated via assembling full cells with LiNi0.8Co0.1Mn0.1O2 and LiNi0.5Mn1.5O4 cathodes. This work offers a method for the rational design of alloy-based materials for advanced energy storage.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsnano.1c11098.Experimental section; XRD pattern and XPS spectra of Mg2Si and C3N4; ID/IG values, C and N contents, N2 adsorption/desorption isotherms, pore size distributions, TEM, HRTEM, and SAED of ; XRD, XPS, SEM and EDS mapping images of Nano-Si; charge/discharge curves of Nano-Si and anodes for LIBs at different rates; digital photograph (electrode and separator), SEM, thickness and thickness changes of Nano-Si and anodes before and after cycles; GITT and diffusion coefficients of and ; XRD, SEM, and EDS mapping images of NCM and LNMO; charge/discharge curves and capacity retentions of a full cell with Nano-Si and anodes at different rates (NCM and LNMO cathodes); EIS curves of a cycled full cell with Nano-Si and anodes (NCM and LNMO cathodes); XRD, SEM, and EDS mapping images of MAX; digital photograph of MXene solution; XRD, Raman, XPS, SEM, EDS mapping images, and digital photograph of MXene; SEM of @NCNFs; SEM of structural evolutions of Cu foil and @NCNFs deposited Li with different area capacities; voltage profiles on Cu and @NCNFs; EIS and SEM of Cu, @NCNFs, , and @ for Li metal anode after cycles; charge/discharge curves and capacity retentions of a full cell with and @ anodes at different rates (NCM and LNMO cathodes); EIS curves of a cycled full cell with and @ anodes (NCM and LNMO cathodes) (PDF)This article has not yet been cited by other publications.

“Nano-Skeleton” Si-SiOx@C Anodes towards Highly Stable Lithium-ion Batteries

Hierarchical Carbon Shell Compositing Microscale Silicon Skeleton As High-Performance Anodes for Lithium-Ion Batteries

A Novel Approach to Synthesize Micrometer-Sized Porous Si/SiOx@C with Internally and Externally Interweaved CNTs As a High Performance Anode for Lithium-Ion Batteries

A Novel Strategy for Lithium-Ion Battery Anode with Enhanced Cycling Performance: Silicon Particles Enclosed in Shell-Like Mxenes/CNTs Nanostructure

Layered Porous Silicon Encapsulated in Carbon Nanotube Cage As Ultra-Stable Anode for Lithium-Ion Batteries

Necklace-like Si@C Nanofibers As Robust Anode Materials for High Performance Lithium Ion Batteries

Mechanically and chemically robust sandwich-structured C@Si@C nanotube array Li-ion battery anodes

Building sandwich-like carbon coated Si@CNTs composites as high-performance anode materials for lithium-ion batteries

Carbon nanotubes anchored SiO x composite anode for high cyclic stability lithium-ion batteries

High-performance Self-Organized Si Nanocomposite Anode for Lithium-Ion Batteries

Mitigating the Capacity Fading of Silicon Nanoparticles Through Double Carbon Coatings and Cobalt Doping

High-Performance Multi-Layers Tubular Nanostructure Anode Materials for Lithium-Ion Batteries

Confining Silicon Nanoparticles Within Freestanding Multichannel Carbon Fibers for High-Performance Li-Ion Batteries

Enhanced stability and kinetic performance of sandwich Si anode constructed by carbon nanotube and silicon carbide for lithium-ion battery

Scalable Synthesis of Si Nanosheets as Stable Anodes for Practical Lithium-Ion Batteries

Carbon Nanofiber Interlayer: a Highly Effective Strategy to Stabilize Silicon Anodes for Use in Lithium-Ion Batteries

One-Step, Vacuum-Assisted Construction of Micrometer-Sized Nanoporous Silicon Confined by Uniform Two-Dimensional N-Doped Carbon toward Advanced Li Ion and MXene-Based Li Metal Batteries

Mechanically Reinforced Localized Structure Design to Stabilize Solid-Electrolyte Interface of the Composited Electrode of Si Nanoparticles and TiO2 Nanotubes

Carbon Nanotubes Anchored SiOx Composite Anode for High Cyclic Stability Lithium-Ion Batteries

A ′′Reinforced Concrete′′ Structure of Silicon Embedded into an In Situ Grown Carbon Nanotube Scaffold as a High-Performance Anode for Sulfide-Based All-Solid-State Batteries

Carbon Nanofiber Cages and Interface Engineering Stabilizing Silicon-Based Anode for High-Performance Lithium-Ion Batteries