Abstract:While lean Mg-Zn-Ca alloys are promising materials for temporary implants, questions remain on the impact of Zn and Ca. In this context, the precipitation in Mg-1.5Zn-0.25Ca (ZX20, in wt.%) was investigated upon linear heating from about room temperature to 400 C, with a particular focus on the debated ternary precipitate phase. Three exothermic differential scanning calorimetry (DSC) peaks were observed at 125, 250 and 320 C. The microstructure at the end of these peaks (205, 260 and 350 C) was probed in a multiscale correlative approach using atom probe tomography (APT) and transmission electron microscopy (TEM). At 205 C, APT analysis revealed Ca-rich, Zn-rich and Zn-Ca-rich clusters of about 3 nm in size and with a number density of 5.7 x 10^23 m^-3. At 260 C, APT and TEM showed mono-layered Zn-Ca-rich Guinier-Preston (GP) zones of about 8 nm in size and with a number density of 1.3 x 10^23 m^-3. At 350 C, there are larger, highly coherent elongated precipitates of about 50 nm in size, in a lower number density, and of two types: either binary Mg2Ca precipitates or less numerous ternary Ca2Mg6Zn3 precipitates, as deduced from scanning TEM-based energy dispersive X-ray spectrometry (EDS) and nanodiffraction in TEM. The highest hardening, probed by Vickers testing, relates to the end of the 125 C DSC peak and thus to GP zones, which outperform the hardening induced by the nanoscale clusters and the larger intermetallic particles. Precipitation in ZX20 upon linear heating was compared to the one induced by hot extrusion at 330 C. Here, ternary precipitates outnumber the binary ones and are larger, incoherent, and in a much lower number density. They are unequivocally made of hexagonal Ca2Mg5Zn5, as deduced by atomically resolved EDS mapping and scanning TEM imaging, and supported by simulations. Precipitation complexity of in lean Mg-Zn-Ca alloys and its kinetic path are discussed.

High‐Throughput Evaluation of Hardening Coefficients of Eight Alloying Elements in Magnesium

Microstructure and Mechanical Properties of Mg-Xy-1.5mm-0.4zr Alloys

Effect of Y on Age Hardening Response and Mechanical Properties of Mg-xY–1.5LPC −0.4zr Alloys

Enhanced age-hardening response of the Mg-Sm alloy via alloying with Cd

Solid Solution Strengthening Mechanism in High Pressure Die Casting Al–Ce–Mg Alloys

Study on the work-hardening behavior and tissue property analysis of high-strength magnesium alloy

Precipitation in lean Mg-Zn-Ca alloys

Crystal Structure, Energetics, and Phase Stability of Strengthening Precipitates in Mg Alloys: A First-Principles Study

Strengthening mechanisms in solution treated Mg– y Nd– z Zn– x Zr alloy

Rapid dislocation-mediated solute repartitioning towards strain-aging hardening in a fine-grained dilute magnesium alloy

The balance between work hardening and softening behaviors of Mg-xZn-1Gd-0.2Ca-0.1Zr alloys influenced by trace Zn addition

Accelerated Development of High-Strength Magnesium Alloys by Machine Learning

Electronic Origin of the Anomalous Solid Solution Hardening of Y and Gd in Mg： A First-Principles Study

An Insight into Mg Alloying Effects on Cu Thin Films:Microstructural Evolution and Mechanical Behavior

First Principles High-Throughput Screening to Enhance the Ductility of Lightweight Magnesium Alloys

Effect of aging temperature on the hardening behavior and precipitation evolution of Mg 10Gd alloy

Enhancement of Hardening and Thermal Resistance of Mg–Sn-based Alloys by Addition of Cu and Al

High-Resolution Electron Microscopy and Kinetic Studies of Precipitation Hardening Reactions in Cast Al-5.8Zn-2.2Mg-2.5Cu

Numerical Investigation on Precipitation Hardening of Mg-Gd Alloys

Effects of Zn and Gd Contents and Their Ratios on Microstructure and Mechanical Properties of As-Cast and As-Extruded Mg−8Li Alloys