Influence of T5 treatment on microstructure evolution and degradation behaviour of additively manufactured AZ91D magnesium alloy for biomedical applications
Chang Chen,Jingya Zou,Qiujun Hu,Qian Min,Qian yin Hu,Yilong Dai
DOI: https://doi.org/10.1016/j.mtcomm.2024.110844
IF: 3.8
2024-11-03
Materials Today Communications
Abstract:In recent years, there has been rapid development in additive manufacturing technology, particularly in the potential of selective laser melting magnesium alloys as degradable implant materials. This study investigates the effects of T5 heat treatment on the microstructure, mechanical properties and corrosion resistance of additively manufactured AZ91D magnesium alloy. The results indicate that after T5 treatment, a large quantity of second phase β-Mg 17 Al 12 precipitated in as-built AZ91D magnesium alloy, transforming from a continuously distributed mesh to a discontinuously distributed point-like existence. Furthermore, the yield strength, ultimate compressive strength and hardness of AZ91D magnesium alloy showed an increasing trend after T5 treatment. Electrochemical and immersion tests indicate that the corrosion resistance of the alloy subjected to aging treatment initially improved, followed by a subsequent decline, with the lowest corrosion rate recorded after 4 h of aging which represents a reduction of approximately 26.34 % compared to the original AZ91D. The corrosion resistance of T5 treated AZ91D alloy is closely associated with micro cracks and the volume fraction of β-Mg 17 Al 12 , which act as microcouples accelerating the corrosion process in the magnesium matrix. This study demonstrates significant improvement in mechanical properties following aging treatment for AZ91D; however, careful control over aging time is necessary to achieve superior corrosion resistance and non-cytotoxicity for potential biomedical applications.
materials science, multidisciplinary