Abstract:Functionalized monomer with specific chain length leads to different behaviors of UV-curable polymers. Due to the high demand for high-performance bio-based coating, this research was conducted to understand the effect of fluoroacrylate monomer (FAM) additions on physicochemical properties of palm oil-based polyurethane (POPU) coating. POPU oligomer was synthesized through a series of steps which was acrylation and isocyanation to form acrylated epoxidized palm oil (AEPO) and POPU oligomer, respectively. The POPU oligomer was further added with trimethylolpropane triacrylate and 1,6 hexamethyl diacrylate monomers at 60/30/10 wt% compositions respectively to form 100 wt% resin and followed by the addition of FAM at different concentrations (2–12 parts per hundred resin, phr). The sample was cast on a silicone mold at 1 mm thickness and cured under UV radiation for 60 s. The chemical structure elucidation was successfully done by NMR on AEPO and POPU. In 1 H NMR analysis, C = C group was detected at 2.0–3.0 ppm and OH peak at 3.687 ppm. For POPU, peak at 3.0 ppm in 1 H NMR analysis suggested that NH functional has formed. In 13 C NMR, the existence of urethane linkage at 172 ppm further confirmed the reaction. The SEM and XRD results revealed that the addition of FAM induced separation between molecules, which lowered the crosslinking density of POPU coating. The thermal properties of POPU improved glass transition temperature (T g ) of the coating by 2.64% at the addition of 2 phr FAM. The physical properties of POPU was also improved as excellent adhesion properties of FPOPU was shown at 2–6 phr FAM addition: for glass (4B), wood (3B), and steel (5B to 4B). The hardness also improved across all substrates, such as glass (2H to 6H), wood (3H to 4H), and steel (7H to 8H). On the other hand, the addition of higher FAM concentrations (8–12 phr) showed a reduction in thermal properties as the T g decreased by 7.54%. Moreover, physical properties of FPOPU also deteriorate as high concentration of FAM added. The hardness decreased for glass (6H to 3H) and steel (6H to 5H). Adhesion also decreased for all the substrates tested, including glass (3B to 2B), wood (3B to 2B), and steel (5B to 3B). The optimum FAM addition contributing to high adhesion, hardness and thermal performance was observed at 4 phr, and the best surface application was steel surface.

Enhanced hydrophobic performance of UV-curable palm oil polyurethane by fluoroacrylate monomer

Synthesis and physicochemical properties of UV-curable palm oil-based polyurethane reinforced with fluoroacrylate monomer

Enhancement of the hydrophobicity and oleophobicity of a polyurethane coating using a fluorine‐free polyfarnesene‐based polyol

Study of a Novel Fluorine-Containing Polyether Waterborne Polyurethane with POSS as a Cross-Linking Agent

Hydrophobicity of Polyacrylate Emulsion Film Enhanced by Introduction of Nano-SiO₂ and Fluorine

Synthesis Of Fluoroalkyl-Modified Polyester And Its Application In Improving The Hydrophobicity And Oleophobicity Of Cured Polyester Coatings

Preparation of UV-Curable Low Surface Energy Polyurethane Acrylate/Fluorinated Siloxane Resin Hybrid Coating with Enhanced Surface and Abrasion Resistance Properties

Synthesis and Properties of Cationic Core-Shell Fluorinated Polyurethane Acrylate

Facile hydrophobic modification of hybrid poly(urethane-urea)methacrylate aqueous dispersions and films through blending with novel waterborne fluorinated acrylic copolymers

Improvement for yellowing resistance of aromatic PU film by fluoro alcohol termination and branching modification

Synthesis and Surface Properties of Novel Fluorinated Polyurethane Base on F‐containing Chain Extender

Synthesis, characterization and properties of a novel fluorinated polyurethane

Synthesis of durable hydrophobic fluorinated polyurethanes with exceptional cavitation erosion resistance

The Synergistic Effect of Terminal and Pendant Fluoroalkyl Segments on Properties of Polyurethane Latex and its Film

Preparation and Characterization of Fluorinated Acrylate and Epoxy Co-Modified Waterborne Polyurethane

Synthesis of New Fluorinated Epoxides and Preliminary Investigations on Their UV-curing Properties

Preparation and application of fluorine-containing acrylate emulsion in two-component waterborne polyurethane coatings

Effects of fluorine and silicon components on the hydrophobicity failure behavior of acrylic polyurethane coatings

Preparation, Characterization, and Properties of Fluorinated Polyurethanes

The synergistic effect of body modification and surface coating for the moisture barrier of hydrophilic PU film

Hydrophobicity of Polyacrylate Emulsion Film Enhanced by Introduction of Nano-SiO2 and Fluorine