Abstract:In order to form large-diameter thin-wall cylindrical workpieces of TA15 titanium alloy, tube hot spinning experiments of the alloy were conducted on a CNC hot spinning machine. The causes of some forming defects occuring in hot spinning, such as crack, pileup, bulge and corrugation, were analyzed and the corresponding measures were put for-ward to avoid spinning defects, based on which a proper process scheme of hot spinning of TA15 alloy was obtained and the large-diameter and thin-walled cylindrical workpieces were formed with good quality. The results show that spinning temperature has distinct influence on forming quality of spun workpieces. The range of spinning temperature determines the spinnability of titanium alloy and the ununiformity of temperature distribution near the deformation zone leads to the formation of bulge. The reasonable heating method is that the deforming region is heated to the optimum temperature range of 600 - 700 degrees C, the deformed region is heated continuously and a certain length of undeformed region is preheated. With the thickness-to-diameter ratio (t1D) of spun workpiece reducing to certain value (t1D < 1 %), surface bulge and corrugation is rather easier to come into being, which could be controlled through restraining diameter growth and employing smaller reduction rate and lower temperature in the optimum spinning temperature range.

Simulation and analysis of hot cylindrical flow forming process of titanium alloy

FEM Numerical Simulation of Spinning Processing for TC4 Alloy

Study on Counter-Roller Spinning Technology of Large Diameter Aluminum Alloy Cylindrical Parts

Finite Element Simulation of Extrusion Process of TC4 Titanium Alloy Profile

Quality analysis and control of tubular wordpiece hot spinning of BT20 titanium alloy

Numerical Simulation of Vertical Centrifugal Casting Process for Complex Ti Alloy Casting

Numerical simulation of hot ball spinning of NiTi shape memory alloy tube

Research on hot deformation behavior and numerical simulation of microstructure evolution for Ti–6Al–4V alloy

Hot Spinning of Cylindrical Workpieces of Ta15 Titanium Alloy

Numerical simulation for mold-filling and coupled heat transfer processes of titanium shaped castings under centrifugal forces

Analysis of ball spinning formability of thin-walled tubular parts of aluminum alloy

The flow forming process simulated by finite element method

Finite element simulation of ball spinning of NiTi shape memory alloy tube based on variable temperature field

Prediction of Microstructure Evolution During Hot Gas Forming of Ti2AlNb-based Alloy Tubular Component with Square Cross-Section

Numerical Simulation of Mold Filling and Solidification of Tial Base Alloy Exhaust Valve in Vertical Centrifugal Casting Process

3D Rigid–plastic FEM Numerical Simulation on Tube Spinning

Study on Numerical Simulation for Control of Winding Process of Thin Wall Spiral Tube

Finite element synthesized analysis of the forming process of spiral welded pipe

Study on the spinning process of thin-walled aluminum alloy vessel head

AN OVERALL NUMERICAL SIMULATION OF HOT METAL FORMING

Study on Simulation and Experiment of Drilling for Titanium Alloys