Abstract:In this study we synthesized LiFePO4/carbon/reduced graphene oxide (LFP/C/rGO) composite cathode materials using a method involving sol–gel processing, spray-drying, and calcination. To improve the electrochemical performance of LFP/C, we tested graphene oxides (GOs) of various morphologies as conductive additives, including pristine GO, three-dimensional GO, and hydrothermal porous GO (HTGO). Among our samples, the cathode material prepared through spray-drying with the addition of 1 wt% of HTGO (denoted SP-LFP/C/1%rHTGO) displayed the best electrochemical performance; its discharge capacities at 0.1C, 1C, 5C, and 10C were 160.5, 151.8, 138.8, and 130.3 mA h g−1, respectively. From measurements of its long-term cycling performance, the discharge capacity in the first cycle and the capacity retention after 30 cycles at 0.1C were 160.2 mA h g−1 and 99.6%, respectively; at 10C, these values were 132.2 mA h g−1 and 91.8%, respectively. The electronic conductivity of SP-LFP/C/1%rHTGO (6.58 × 10−5 S cm−1) was higher than that of the pristine LFP/C (9.24 × 10−6 S cm−1). The Li+ ion diffusivities (DLi+) of the SP-LFP/C/1%HTGO cathode, measured using AC impedance (3.91 × 10−13 cm2 s−1) and cyclic voltammetry (6.66 × 10−10 cm2 s−1 for discharge), were superior to those of the LFP/C cathode (9.31 × 10−15 cm2 s−1 and 1.79 × 10−10 cm2 s−1 for discharge, respectively). Galvanostatic intermittent titration revealed that the value of DLi+ was located in a reasonable range from 1 × 10−10 to 1 × 10−17 cm2 s−1; its value dropped to its lowest point when the state of charge was close to 50%. Thus, the use of spray-drying and the addition of conductive HTGO (having a 3D wrinkled morphology and interconnected pore structure) can enhance the electronic conductivity and Li+ ion diffusivity of LFP/C cathode materials, thereby improving the electrochemical performance significantly.

On the enhanced electrochemical properties of dihydrate hydroxyl ferric phosphate: Effects of intrinsic crystal water and additive graphene oxide

Synergistic Ternary Composite (carbon/fe3 O4 @graphene) with Hollow Microspherical and Robust Structure for Li-Ion Storage.

Improving the electrochemical properties of lithium iron(II) phosphate through surface modification with manganese ion(II) and reduced graphene oxide

Metal-organic framework-derived high conductivity Fe<sub>3</sub>C with porous carbon on graphene as advanced anode materials for aqueous battery-supercapacitor hybrid devices

Fe2O3/MoO3@NG Heterostructure Enables High Pseudocapacitance and Fast Electrochemical Reaction Kinetics for Lithium-Ion Batteries

Modifying the morphology and structure of graphene oxide provides high-performance LiFePO4/C/rGO composite cathode materials

The Reduced Graphene Oxide Conductive Additives with a Certain Defect Concentration Enabling Rate-Capability of Lithium-Ion Batteries

Synthesis of iron oxide cubes/reduced graphene oxide composite and its enhanced lithium storage performance

Facile fabrication of the hybrid of amorphous FePO4·2H2O and GO toward high performance sodium-ion batteries

Erythrocyte-like Fe2O3@SnO2 heterostructures anchored on graphene oxide composite anode material for high-performance lithium-ion battery

Fe3O4 Nanoparticles Enhanced Amorphous Ferric Silicate/Reduced Graphene Oxide for High‐Performance Lithium‐Ion Storage

Rationally engineering a hierarchical porous carbon and reduced graphene oxide supported magnetite composite with boosted lithium-ion storage performances

Preparation of graphene oxide/poly(o-phenylenediamine) hybrid composite via facile in situ assembly and post-polymerization technology for the anode material of lithium ion battery

The polymer composite electrolyte with polyethylene oxide-grafted graphene oxide as fillers toward stable highcurrent density lithium metal anodes

Unravelling the Regulating Role of Graphene Coating on Improving the Electrochemical Performance of Pyrophosphate Cathode Material: A First-Principles Study

Research based on graphene oxide composite with LiFe0.97Ni0.03PO4

Chemically engineered graphene oxide as high performance cathode materials for Li-ion batteries

Nitrogen-doped Carbon Stabilized LiFe0.5Mn0.5PO4/rGO Cathode Materials for High-Power Li-ion Batteries

A synergistic effect of lithium titanate/pristine graphene composite with enhanced lithium storage capability

N-doped Graphitized Carbon-Coated Fe 2 O 3 Nanoparticles in Highly Graphitized Carbon Hollow Fibers for Advanced Lithium-ion Batteries Anodes

Composites of Reduced Graphene Oxide and Fe 2 O 3 Nanoparticles Anchored on MoS 2 Nanosheets for Lithium Storage