Abstract:China fusion engineering test reactor is a new tokamak device, which is one design option under the consideration of the China National Integration Design Group employs superconducting magnets. The main target of this project is to build a self-sufficient fusion engineering tokamak reactor with its fusion power 50-200 MW. Toroidal field coils, center solenoid coils, and poloidal field (PF) coils, whose rated current range from 52.9 to 90 kA, produce the magnetic field for plasma generation and confinement. The core of quench protection unit is to divert the coil current into discharge resistor by using commutation technology, which should be determined by the rated current and voltage requirement of magnets. Different kinds of technologies for quench protection unit (QPU) are considered, and an advanced commutation technology composed of a mechanical bypass switch, vacuum circuit breaker (VCB), and LC commutation circuit based on artificial current zero technology has been worked out to meet the current and voltage requirement (10 kV/100 kA). To provide a faster and more reliable removal of the energy stored in those superconducting coils, this paper analyzes in detail the feasibility of a commutation scheme based on artificial current zero technology by analyzing and simulating each stage of the commutation process at such large rated current and voltage conditions. Both analysis and simulation results verified that the operating reliability of QPU can be guaranteed by this 100 kA dc commutation scheme.

Analysis, design, and testing of mechanical switch for the backup protection of switching network unit in fusion device

Design and Performance Analysis of Multi-gap Multi-channel Spark Switch with LCR Triggered Method

Design of A Novel Hybrid Non-Contacted Switch

Research on Unloaded Switching into Fault Protection for UHV Transmission Line

Design And Test Of Unified Power Flow Controller Protection Circuits

Design of control system for quench protection unit in CRAFT project

A 15-Ka Solid-State Circuit Breaker Research and Development for the Switch Network Unit of the EAST Tokamak

Control strategy and experimental verification of hybrid DC circuit breaker

Development and Analysis of the Double-layer Water-cooled Heat Sink for the Switch Network Unit of the EAST

Design of New Arc Protection Device

Design and Test of the Bidirectional Solid-State Switch for an 160kv/9ka Hybrid DC Circuit Breaker

Parametric Design Platform for Power Electronic Switches in the Hybrid DC Circuit Breaker

Experimental Investigation on the Second Commutation Process of a Quench Protection Switch

Soft-Landing Mechanism Design Driven by Electromagnetic Repulsion Force with Application to Bypass Switch

Study on Three-electrode Gas Switch Applied in LHCD High Voltage Power Supply

Feasibility Analysis of 100 Ka DC Commutation Scheme to Be Applied in the Quench Protection Unit of CFETR

Research on Integrated Design of Vacuum Switch Based on Permanent Magnetic Actuator for Hybrid DC Contactor

Experimental Investigation on the Interruption Performance of Vacuum Interrupters With AMF and TMF Contacts in a Quench Protection Switch

Numerical Investigation on the Steady Temperature Rise of a By-Pass Switch

Design and experiment of mechanical superconducting switch

Design of Experimental Contact System for Low Voltage Electrical Switch