Abstract:During the past years, the power conversion efficiency (PCE) of perovskite solar cells (PSCs) has increased from 3.8% to 25.7%, making them the best candidate for the next-generation photovoltaic devices. Two dominant PSC architectures have evolved, a regular n-i-p structure with mesoscopic or planar heterojunction and an inverted p-i-n planar structure. Compared to the regular n-i-p PSCs, the inverted p-i-n PSCs possess the advantages of lower synthesis temperature, no hysteretic effect and good compatibility with the tandem solar cells. For p-i-n PSCs, the hole transport layer (HTL) determines the hole transport efficiency and crystallinity of perovskite, so it plays a crucial role in the stacked devices. The conventional organic HTL of PEDOT:PSS-based PSCs can achieve satisfying PCEs, but may be able to impede the commercialization of perovskite photovoltaic devices because of their high price and acidity-induced poor stability. By comparison, the inorganic P-type NiOx with wide band gap exhibits low cost, superior chemical stability and high hole mobility without corrosion to perovskite layer. Unlike the most reported spin-coated NiOx nanoparticle films, we used sputtered NiOx as HTL for application in FA-based PSCs and achieved a PCE of 20.05%. After systematically optimizing the sputtering parameters, including power, time and argon flow rate, we obtained better crystal quality, better transparency, proper energy level, and higher hole mobility of NiOx film. Reducing the interstitial vacancies and defects in NiOx films attributes to decreased nonradiative recombination losses, which mainly cause the hole accumulation near the perovskite/NiOx interface. Finally, a champion device with open-circuit voltage (Voc) of 1.09 V, current density (Jsc) of 23.4 mA/cm 2 , fill factor (FF) of 78% and PCE of 20.05% are obtained. This work has important significance for preparation of large-area perovskite solar cell modules.

85 °C/85%‐Stable n‐i‐p Perovskite Photovoltaics with NiOx Hole Transport Layers Promoted By Perovskite Quantum Dots

Synergistic Effect between NiOx and P3HT Enabling Efficient and Stable Hole Transport Pathways for Regular Perovskite Photovoltaics

Thermally-stable and highly-efficient bi-layered NiOx-based inverted planar perovskite solar cells by employing a p-type organic semiconductor

Stabilizing n-type hetero-junctions for NiOx based inverted planar perovskite solar cells with an efficiency of 21.6%

Surface Modification of NiO Nanoparticles for Highly Stable Perovskite Solar Cells Based on All-Inorganic Charge Transfer Layers

High Efficiency and Stability of Inverted Perovskite Solar Cells Using Phenethyl Ammonium Iodide-Modified Interface of NiOx and Perovskite Layers

Porphyrinic Metal–Organic Framework Quantum Dots for Stable n–i–p Perovskite Solar Cells

Boosting interfacial contact for the NiO x -based inverted perovskite solar cells via D-A type semiconductor

Sputtered Niox Films As Hole Transport Layers for FA-Based Perovskite Solar Cell Application

Triple hole transporting and passivation layers for efficient NiOX-based wide-bandgap perovskite solar cells

NiOx Nanocrystals with Tunable Size and Energy Levels for Efficient and UV Stable Perovskite Solar Cells

Redox-Sensitive NiOx Stabilizing Perovskite Films for High-Performance Photovoltaics

Performance Comparison between the Nanoporous NiO x Layer and NiO x Thin Film for Inverted Perovskite Solar Cells with Long-Term Stability

High‐Performance Inverted Perovskite Solar Cells with Sol–Gel‐Processed Sliver‐Doped NiOX Hole Transporting Layer

D-p-D molecular layer electronically bridges the NiO<i><sub>x</sub></i> hole transport layer and the perovskite layer towards high performance photovoltaics

Unraveling the Modification Effect at NiOx/perovskite interfaces for Efficient and Stable Inverted Perovskite Solar Cells

Pristine inorganic nickel oxide as desirable hole transporting material for efficient quasi two-dimensional perovskite solar cells

Oxidized Nickel to Prepare an Inorganic Hole Transport Layer for High-Efficiency and Stability of CH3NH3PbI3 Perovskite Solar Cells

Nickel Oxide as Efficient Hole Transport Materials for Perovskite Solar Cells

D-π-D molecular layer electronically bridges the NiO hole transport layer and the perovskite layer towards high performance photovoltaics

Printable and Homogeneous NiO x Hole Transport Layers Prepared by a Polymer‐Network Gel Method for Large‐Area and Flexible Perovskite Solar Cells