Abstract:Supercritical water gasification (SCWG) technology can convert biomass into hydrogen rich gas and biochar. Fluidized bed reactor is promising for the industrialization of this technology, and the reactor dynamic perfor-mance study is of great significance for its scaling up. However, current simulation studies mainly focus on steady-state analysis using Computational Fluid Dynamics (CFD) software, it is difficult to conduct dynamic study due to its high computational costs. To this end, a reactor network model (RNM) that accounts for the flow, heat transfer, and kinetic dynamics for fluidized bed reactor is firstly developed based on the partitioning theory, which can reduce the computation time of dynamic simulation from several days to seconds. Additionally, extensive open-loop simulations of the RNM are carried out to generate the dataset for the development of a recurrent neural network (RNN) model. Additionally, current studies mainly focus on open-loop simulation, closed loop optimization is absent. To this end, a framework for building a machine learning (ML) model and a ML-based nonlinear predictive control scheme is developed. Model predictive control (MPC) schemes based on the RNN model is used to optimize the SCWG process to achieve multiple objectives, such as maximizing hydrogen yield and carbon yield. The open loop simulation results demonstrate that H2 yield decreases from 0.00022 to 0.0002 kg s-1 with temperature reducing from 700 to 600 degrees C. To increase H2 yield to the setpoint, MPC increases temperature and mass flowrate to 708 degrees C and 417.57 kg h-1. Additionally, MPC increases carbon yield and minimizing CO2 yield by decreasing temperature to 475 degrees C and increasing mass flowrate to 407.38 kg h-1.

Model predictive control of a dual fluidized bed gasification plant

Predictive Control and Economic Performance Optimization of CFBB Combustion Process

Model Predictive Control of a High‐Purity Internal Thermally Coupled Distillation Column

Identification and predictive control for a circulation fluidized bed boiler

Identification and MPC Control of a Circulation Fluidized Bed Boiler Using an LPV Model

Get the design right, the rest is automatic: Towards an adaptive MPC controller

Development of a Three-Term MPC and Its Application to an Ultra-Supercritical Coal Fired Power Plant

Model Predictive Control Strategy Based on Prediction Error Feedforward for Superheating Process.

Multi-Scale Simulation of Biomass Gasification in Fluidized Beds

Predictive control strategy of a gas turbine for improvement of combined cycle power plant dynamic performance and efficiency

CFD Modelling of the Co-Gasification of Biomass and Coal Particles in Fluidised Beds

Model predictive control for an IGCC gasifier

Predictive Control of Reactor Network Model Using Machine Learning for Hydrogen-Rich Gas and Biochar Poly-Generation by Biomass Waste Gasification in Supercritical Water

A Novel Adaptive Generic Model Control Strategy for Internal Thermally Coupled Air Separation Columns with Multivariable Recursive Estimation.

Development of a neural network model predictive controller for the fluidized bed biomass gasification process

Model Predictive Control with Feedforward Strategy for Gas Collectors of Coke Ovens

Model Predictive Control of District Heating Grids Using Stabilizing Terminal Ingredients

Towards model predictive control of supercritical CO2 cycles

Process-Model-Free Design of MPC Via a Reference-Model-Based PI Controller for the Gas Turbine

Deep Learning-Based Model Predictive Control for Continuous Stirred-Tank Reactor System

Multi-model Predictive Control of Ultra-supercritical Coal-fired Power Unit