Abstract:This investigation explores the corrosion behavior and mechanism of as-cast dual phase Fe1.125Ni1.06CrAl high entropy alloy with low density (6.65 g/cm3) and high hardness (460.67 kgf/mm2) in 3.5 wt% NaCl solution. The microstructure, elemental distribution and corrosion behavior of high entropy alloys before and after the corrosion process were investigated via electrochemical quantitative analysis and then the corrosion mechanism of high entropy alloys was obtained by the first principles and experimental modeling approaches. The results show that quaternary Fe1.125Ni1.06CrAl high entropy alloy display spinodal decomposition microstructure of dual BCC phase with high hardness and distinguished corrosion resistance compared with other established alloys. The self-corrosion current density of 9.262 × 10−9 A/cm2 and corrosion potential of − 0.228 V are gotten for this alloy via potentiodynamic polarization measurements and the calculated parameters of high entropy alloys were analyzed by fitting equivalent circuit. Corrosive pits emerged on the alloy surface when the Fe1.125Ni1.06CrAl and Fe1.125Ni1.125CrAl specimens have experienced preferentially localized corrosion at the areas enriched in Ni and Al characterized by scanning electronic microscope and atomic force microscope. Oxides and hydroxides films of constitutional elements on the alloy surface are formed by X-ray photoelectron spectroscopy analysis, which indicates that corrosion properties of high entropy alloys possess. Chloride anions are easier to be adsorbed and attacked on the BCC2 phase surface based on the adsorption behavior analysis, accelerating the localized pitting and micro-galvanic corrosion processes.

Corrosion Mechanism of High-Entropy DdTbDyHoSc and GdTbDyHoY Alloys

Corrosion Resistance of GdTbDyHoSc and GdTbDyHoY High-Entropy Rare-Earth Alloys with Protective Coatings

Mechanical Properties of High Entropy Alloys Based on Rare Earth Elements with Yttrium and Scandium

Microstructure and Corrosion Property of Equiatomic AlNiZrCuY High Entropy Amorphous Composite Material

Electrochemical kinetics of the high entropy alloys in aqueous environments—a comparison with type 304 stainless steel

Corrosion behavior of AlNiCoCuZr high-entropy equiatomic alloy in NaCl solution

Corrosion behavior of FeCoNiCrCux high-entropy alloys in 3.5% sodium chloride solution

Effects of Yttrium on Corrosion Behavior of 09crcusb Alloy in High Concentration Sulfuric Acid

Investigation of Corrosion Behaviors of Mg–6Gd–3Y–0.4Zr Alloy in NaCl Aqueous Solutions

Alloying and Processing Effects on the Aqueous Corrosion Behavior of High-Entropy Alloys

Effect of Yttrium on the Corrosion Behavior of 09crcusb Alloy in NaCl Solution

Synthesis and Electrochemical Corrosion Behaviour of High Entropy Alloys

Comparative Study on Corrosion Behavior and Mechanism of As-Cast Mg–Zn–Y and Mg–Zn–Gd Alloys

Corrosion behavior and mechanism of dual phase Fe1.125Ni1.06CrAl high entropy alloy

Corrosion and passive behaviors of the Co-Cr-Fe-Ni-Nb eutectic high-entropy alloys in different electrolyte solutions

Comparative corrosion behavior of Fe50Mn30Co10Cr10 dual-phase high-entropy alloy and CoCrFeMnNi high-entropy alloy in 3.5 wt% NaCl solution

STUDY OF CORROSION RESISTANCE OF HIGH ENTROPY ALLOY Al0.5CoCrFeNi1.6Ti0.7 IN SEA WATER

Corrosion Resistance of Ribbon and Bulk Amorphous Alloys Based on Iron

The effect of Mn addition on corrosion behaviour of equiatomic CoCrFeNi high entropy alloys in NaCl solution

Application of Electrochemical Techniques to Characterization of the Corrosion Behaviors of Gw63 Alloys

Corrosion Behavior of Hf0.5Nb0.5Ta0.5Ti1.5Zr Refractory High-Entropy in Aqueous Chloride Solutions