Abstract:ABSTRACT Magnetic abrasive finishing is a prevalent advanced method which by applying gentle forces using flexible magnetic abrasives for removing surface irregularities, provides a micro/nano range of defect-free surface finish. During magnetic abrasive finishing, magnetic forces allow the flexible magnetic abrasive particles to shear off the material from the surface in the form of microchips. During the finishing of a material having high hardness value such as titanium alloy, Nimonic alloy, and ceramics, etc., it is necessary to choose a proper magnetic abrasive considering the rate of improvement required in the surface finishing. In this research work, a new magnetic abrasive has been developed, which is suitable for finishing of Ti-6Al-4 V. The sintering method was used to develop the magnetic abrasive, and hence the developed magnetic abrasive has been named as-sintered magnetic abrasive (SMA). A mixture of abrasive powder of aluminium oxide and silicon oxide (Al2O3-SiO2) with carbonyl iron particles (ferromagnetic material) has been taken as components of sintered magnetic abrasive. The authors have studied the morphology of the sintered magnetic abrasive by scanning electron microscopy (SEM), energy dispersive spectrum (EDS), and structure by the X-ray diffraction technique. The findings reveal that the abrasives were uniformly and tightly rooted in the carbonyl iron particles. Also, magnetic abrasive finishing roughness studies on the Ti-6Al-4 V workpiece were carried to evaluate the performance of SMA. Change in the surface roughness from R a = 1.14 µm to R a = 0.85 µm was observed and atomic force microscopy (AFM) of the finished surface confirms an excellent finishing effect by the developed sintered magnetic abrasive on Ti-6Al-4 V during magnetic abrasive finishing.

Achieving in-situ Fe-based spherical particles for magnetic abrasive finishing process of Zirconium tube via gas nitriding method

Optimizing processing performance of Fe-6.5 wt%Si–SiC magnetic abrasive particles by in-situ formation of Fe x Si y interlayer

Achieving in-situ alloy-hardening core-shell structured carbonyl iron powders for magnetic abrasive finishing

Co-optimization of magnetic abrasive finishing behaviors of zirconium tube surfaces with Fe-6.5 wt% Si/SiC abrasives using BP neural network and response surface methodology

Design and processing behavior of large tubes with a rotating magnetic pole core-based magnetic abrasive finishing

Finishing mechanism modelling on magnetic abrasive finishing behaviours with core-shell magnetic abrasive particles

Enhancing Zero-Valent Iron (ZVI) Pulverization During Mechanical Milling: FeSx As Milling Aids

Investigation of Synthesis, Characterization, and Finishing Applications of Spherical Al2O3 Magnetic Abrasives via Plasma Molten Metal Powder and Powder Jetting

Estimation of the Efficiency of Applying Nitrogen Powder Materials in Magnetic Abrasive Processing Technology

Influence of Fabrication Process on Magnetic Properties of Co-Finemet Nanocrystalline Powder Core

Study on magnetic abrasive finishing of the inner surface of Ni–Ti alloy cardiovascular stents tube

Preparation of Al2O3 magnetic abrasives by combining plasma molten metal powder with sprayed abrasive powder

Fabrication of Spherical Fe-based Magnetic Powders Via the in Situ De-Wetting of the Liquid–solid Interface

Development of Al2O3-SiO2 based magnetic abrasive by sintering method and its performance on Ti-6Al-4V during magnetic abrasive finishing

Effect of Fe Content on the Tribological Properties of Ni60 Coatings Applied by Pulsed Magnetic Field Assisted Supersonic Plasma Spraying

Modeling of material removal by magnetic abrasive finishing of the inner wall of Co-Cr alloy cardiovascular stent tube with diamond magnetic abrasive powder prepared by plasma melting

Influence of LZN Nanoparticles on Microstructure and Magnetic Properties of Bi-Substituted LiZnTi Low-Sintering Temperature Ferrites

Preparation and characterization of highly catalytic and corrosion resistant Fe–Ti–O magnetorheological composite powders

Fabrication of FeSiB magnetic coatings with improved saturation magnetization by plasma spray and dry-ice blasting

Study on Internal Magnetic Abrasive Finishing of Thin and Long Austenitic Stainless Steel Tube

In-situ Crystallization Route to Nanorod-Aggregated Functional ZSM-5 Microspheres.