Abstract:This study describes the application of a magnetic abrasive finishing process (MAF) to the inner wall of the Co-Cr alloy cardiovascular tube to obtain a fine surface roughness and improve the surface quality. The high-performance spherical iron-based diamond magnetic abrasive powder (MAP) used in the experiments was prepared via combining plasma molten metal powder with sprayed abrasive powder. The experiments were carried out on a MAF machining machine for slender tubes, with permanent slotted magnets as the magnetic field-generating device. The processing mechanism of the MAF on the inner wall of the tube was analyzed, and the magnitude and distribution of the magnetic flux in the processed area were simulated by software. The material removal model for MAF processing of the inner wall of the tube was constructed from mechanical properties of magnetic abrasives and the workpiece and five applied process parameters: finishing time, tube rotational speed, magnetic feed rate, size of MAPs, and filling quantity of MAPs. Single-factor experiments were designed and carried out using surface roughness Ra and quality differences before and after MAF processing as evaluation indicators. The results were used to analyze the relationship between five process parameters and surface roughness Ra and material removal MR. Scanning electron microscopy was used to observe the effect of the MAF process on the surface quality. It shows that the MAF process can effectively remove the defective layer from the workpiece and improve its surface smoothness and quality. The surface roughness Ra of 0.46–0.49 μm before finishing was decreased to 0.093 μm with optimal process parameters.

Finishing mechanism modelling on magnetic abrasive finishing behaviours with core-shell magnetic abrasive particles

Design and processing behavior of large tubes with a rotating magnetic pole core-based magnetic abrasive finishing

Optimizing processing performance of Fe-6.5 wt%Si–SiC magnetic abrasive particles by in-situ formation of Fe x Si y interlayer

Incined Magnetorheological Finishing and Its Path Controlling

Co-optimization of magnetic abrasive finishing behaviors of zirconium tube surfaces with Fe-6.5 wt% Si/SiC abrasives using BP neural network and response surface methodology

Parametric Studies on Finishing of AZ31B Magnesium Alloy with Al2O3 Magnetic Abrasives Prepared by Combining Plasma Molten Metal Powder with Sprayed Abrasive Powder

Achieving in-situ alloy-hardening core-shell structured carbonyl iron powders for magnetic abrasive finishing

Modeling of material removal by magnetic abrasive finishing of the inner wall of Co-Cr alloy cardiovascular stent tube with diamond magnetic abrasive powder prepared by plasma melting

Experimental Investigation on Magnetic Abrasive Finishing for Internal Surfaces of Waveguides Produced by Selective Laser Melting

Modeling and simulation of the action mechanism of multi-particles in magnetic abrasive finishing for internal blind cavity using the discrete element method

Influence of Process Parameters and Initial Surface on Magnetic Abrasive Finishing of Flat Surfaces on CNC Machine Tools

Polishing Characteristics of Cemented Carbide Using Cubic Boron Nitride Magnetic Abrasive Powders

Research on grinding force modelling of spherical alumina magnetic abrasive powder

Surface roughness prediction and process parameter optimization of Ti-6Al-4 V by magnetic abrasive finishing

Investigation of Synthesis, Characterization, and Finishing Applications of Spherical Al2O3 Magnetic Abrasives via Plasma Molten Metal Powder and Powder Jetting

Achieving in-situ Fe-based spherical particles for magnetic abrasive finishing process of Zirconium tube via gas nitriding method

Modelling and simulation of tool passivation by magnetic elastic abrasive particles

Magnetic Bingham Fluid-Assisted Deterministic Polishing for Super-Smooth Surfaces

Optimizing Parameters for Magnetorheological Finishing Supersmooth Surface

Study on the Micro Removal Process of Inner Surface of Cobalt Chromium Alloy Cardiovascular Stent Tubes

Experimental Investigation on the Effect of Surface Shape and Orientation in Magnetic Field Assisted Mass Polishing