Abstract:Biomass is a green source of power since it has minimal to no impact on biodiversity and offers global security for ecological sustainability. Gasification is a thermochemical procedure that turns a source into a by-product (fuel gas). Biomass has an edge over carbon fuels because it is sustainable. It acts as a steady source of feedstock and works as a viable candidate for energy production because it is sustainable. A few other negative repercussions of their extraordinary use include the persistent unpredictability of demand and supply for fossil fuels, environmental harm, and the consequences of climate change. Different factors, such as temperature, particle size, biomass composition, gasifier design, operating conditions, etc., have an impact on a biomass gasifier's efficiency. During gasification, a number of simultaneous reactions actually happen, and some components can serve as both reactants and products. We are reporting for the first time the optimization of biomass mixture (sugarcane bagasse and sawdust) along with equivalence ratio and air flow rate. Preliminary experiments were conducted to ascertain the range and levels of operations of three factors, such as equivalence ratio (ER), air flow rate, and biomass ratio. Optimization involving Box-Behnken design was utilised to decipher the effect of three influencing parameters such as biomass mixture of sugarcane bagasse and sawdust (25%, 50%, and 75%); low air flowrates (10.5, 13.0, and 16.5 L/hr) and equivalency ratios (0.2, 0.3, and 0.4) on gas yield, tar yield, and gas heating value of biomass using an Intrinsic circulating fluidized-bed reactor. All stochastic parameters validated our model. An optimal gas yield, tar yield, and gas heating value of 1.881 Nm3/Kg, 11.360, and 8.188 were predicted at an equivalence ratio (ER) of 0.3, air flow rate of 16.5 L/h, and biomass ratio of 0.75 (75% sugarcane bagasse to 25% sawdust ratio) at a desirability of 1.00. The experimental values were found to be: gas yield (1.867 Nm3/Kg), tar yield (14.0 g/Nm3), and gas heating value (8.15 MJ/Nm3). Trialswere conducted in-order to warrant the predicted circumstancesand the results were found to be correlated with experimental values. Keywords Gasification, gas yield, tar yield, gas heating value, biomass combination.

Experimental and numerical study on multiphase fluid dynamics of coal and blends with biomass (sugarcane bagasse) in a lab-scale full-loop circulating fluidized bed gasifier

CFD Modelling of the Co-Gasification of Biomass and Coal Particles in Fluidised Beds

Multi-Scale Simulation of Biomass Gasification in Fluidized Beds

CFD investigation of the complex multiphase flow of biomass gasification in industrial-scale dual fluidized bed reactor

Numerical study of biomass gasification in a 0.3 MWth full-loop circulating fluidized bed gasifier

CFD simulation of air-blown coal gasification in a fluidized bed reactor with continuous feedstock

Numerical Study of Gas–solid Flow in a Coal Beneficiation Fluidized Bed Using Kinetic Theory of Granular Flow

Multiphase flow and reactor optimization of a 1MWth pilot-scale circulating fluidized bed for coal staged conversion

Eulerian-Lagrangian simulation study of the gas-solid reacting flow in a bubbling fluidized coal gasifier

MFiX-TFM simulation of hydrodynamics of a dual fluidized bed system

Advanced Modeling Approaches for CFD Simulations of Coal Combustion and Gasification

Computational Fluid Dynamic (CFD) Simulation of Thar Lignite Coal and Sugarcane Bagasse in Entrained Flow Gasifier

Numerical simulation of a chemical looping combustion of biomass: Hydrodynamic investigation

Three-dimensional Full-Loop Numerical Simulation of Co-Combustion of Coal and Refuse Derived Fuel in a Pilot-Scale Circulating Fluidized Bed Boiler

Three-dimensional Modeling Study of the Oxy-Fuel Co-Firing of Coal and Biomass in a Bubbling Fluidized Bed

Study of biomass gasification in an industrial-scale dual circulating fluidized bed (DCFB) using the Eulerian-Lagrangian method

Numerical simulation of gasification characteristics in a circulating fluidized bed biomass gasifiers

An Experimental And Response-Surface-Based Optimization Approach Towards Production Of Producer Gas In A Circulating Fluidized Bed Gasifier Using Blends Of Renewable Fibre-Based Biomass Mixtures

Coarse-grained CFD-DEM simulation of coal and biomass co-gasification process in a fluidized bed reactor: Effects of particle size distribution and operating pressure

Experimental investigation on biomass combustion in a pilot-scale circulating fluidized bed combustor

Three-Dimensional Simulation for an Entrained Flow Coal Slurry Gasifier