Abstract:Purpose This paper aims to develop a model that reflects the current transformer (CT) core materials nonlinearity. The model enables simulation and analysis of the CT excitation current that includes the inductive magnetizing current and the resistive excitation current. Design/methodology/approach A nonlinear CT model is established with the magnetizing current as the solution variable. This model presents the form of a nonlinear differential equation and can be solved discretely using the Runge–Kutta method. Findings By simulating variations in the excitation current for different primary currents, loads and core materials, the results demonstrate that enhancing the permeability of the B–H curve leads to a more significant improvement in the CT ratio error at low primary currents. Originality/value The proposed model has three obvious advantages over the previous models with the secondary current as the solution variable: (1) The differential equation is simpler and easier to solve. Previous models contain the time differential terms of the secondary current and excitation flux or the integral term of the flux, making the iterative solution complicated. The proposed model only contains the time differential of the magnetizing current. (2) The accuracy of the excitation current obtained by the proposed model is higher. Previous models calculate the excitation current by subtracting the secondary current from the converted primary current. Because these two currents are much greater than the excitation current, the error of calculating the small excitation current by subtracting two large numbers is greatly enlarged. (3) The proposed model can calculate the distorted waveform of the excitation current and error for any form of time-domain primary current, while previous models can only obtain the effective value.

Error Analysis of Air-Core Coil Current Transformer Based on Stacking Model Fusion

Modeling and Evaluation of Stator and Rotor Faults for Induction Motors

CVT on-line error measurement hybrid-driven by domain knowledge and Stacking Model

Multi-field Simulation Model of Transformer Core Considering Stacking Effect

A Grid Fault Diagnosis Method Based on Stacking Algorithm

A stacking machine‐learning based method for accelerating magnetic coupler design with ferrite cores in inductive power transfer applications

Prediction model of measurement errors in current transformers based on deep learning

An Analytical Model of Air-Gap-Core Current Transformer Considering Loading Effect

Diagnostic System for Current-Carrying Fault: Modeling, Precaution, and Prediction

Optimal Design and Verification of Stacking-Hole in Transformer Core Based on Analysis of Magnetic-Fluid-Thermal Coupling

Modelling and Theoretical Analysis of an Air-Core Transformer with Strong Coupled Schemes

ANALYSIS OF ELECTROMAGNETIC FIELDS AND EDDY CURRENT LOSSES IN LARGE POWER TRANSFORMERS

A Methodology to Diagnose Transformer Faults Based on Principal Components Analysis and Artificial Neural Network

Modelling and Optimization of Four-Segment Shielding Coils of Current Transformers

Loss of Life Transformer Prediction Based on Stacking Ensemble Improved by Genetic Algorithm By IJISRT

Design of double-loop current transformer based on magnetic field incomplete cancellation

Analysis of Fine Fault Electrothermal Characteristics of Converter Transformer Reduced-Scale Model

Fault Warning Method for Power Transformers Based on Neural Network Algorithm Guided by Multi-Physics Simulation

Numerical Simulation Analysis on Core Structure Optimization of Heavy Protective Current

SYNTHETIC INSULATION FAULT DIAGNOSTIC MODEL OF OIL-IMMERSED POWER TRANSFORMERS UTILIZING INFORMATION FUSION

Modeling and Simulation Analysis of Current Transformer Based on Magnetizing Current As the Solution Variable