Abstract:International Journal of Modern Physics B, Ahead of Print. This research focuses on the sustainable optimization of the milling process for Titanium Alloy Ti-6Al-4V using Minimum Quantity Lubrication (MQL) assistance. This experimental research investigates the effects of cutting parameters and lubrication conditions on the surface roughness ([math]) and flank wear ([math]) in the milling process of Titanium Alloy Ti-6Al-4V. The study aims to evaluate the influence of cutting speed ([math]), feed rate ([math]) and depth of cut ([math]) on the selected machining performance indicators. The experiments were carried out using a DMG Mori Seiki DMU50 CNC center, and the workpiece samples were measured at [math]. Three different lubrication conditions were employed, including dry machining, conventional flood cooling and Minimum Quantity Lubrication (MQL) using peanut oil. The cutting parameters were varied based on a Taguchi L9 orthogonal array design to explore the main effects of each parameter on [math] and [math]. The results reveal that cutting speed ([math]) has the most significant influence on surface roughness, followed by feed rate ([math]), while the impact of depth of cut ([math] is negligible in comparison. Conversely, the coolant mode has the most significant impact on flank wear ([math]), followed by feed rate ([math]) and depth of cut ([math]), while the influence of cutting speed ([math] is relatively minor. Under the same cutting parameters, transitioning from dry machining to MQL led to a sharp decrease in [math] from 170 to 100[math][math]m, and it increased to approximately 145[math][math]m when switching to flood cooling. Additionally, increasing the feed rate from 0.02 to 0.06[math]mm/tooth reduced [math] from around 135 to 120[math][math]m, but it significantly rose to approximately 165[math][math]m when the feed rate was further increased. Furthermore, the application of MQL with peanut oil as a lubricant and coolant demonstrated improvements in surface finish and reduced tool wear compared to dry and conventional flood cooling. The MQL approach led to better machining performance with lower [math] and [math] values. Overall, this study provides valuable insights into the effects of cutting parameters and lubrication conditions on surface roughness and flank wear in the milling process of Titanium Alloy Ti-6Al-4V. The findings offer practical guidelines for optimizing machining conditions to achieve desired surface quality and extend tool life while considering the environmental benefits of employing MQL in the manufacturing process.

Optimization of Al2O3 nanoparticle concentration and cutting parameters in hard milling under nanofluid MQL environment

Machinability Assessment of Hybrid Nano Cutting Oil for Minimum Quantity Lubrication (MQL) in Hard Turning of 90CrSi Steel

Experimental Investigation on the Compatibility of Nanoparticles with Vegetable Oils for Nanofluid Minimum Quantity Lubrication Machining

Tribology and machinability performance of hybrid Al2O3 -MWCNTs nanofluids-assisted MQL for milling Ti-6Al-4 V

Study on High-Speed Machining of 2219 Aluminum Utilizing Nanoparticle-Enhanced Minimum Quantity Lubrication (MQL) Technique

Effects of SiO2-Al2O3-ZrO2 Tri-hybrid Nanofluids on Surface Roughness and Cutting Temperature in End Milling Process of Aluminum Alloy 6061-T6 Using Uncoated and Coated Cutting Inserts with Minimal Quantity Lubricant Method

A Novel Approach of Applying Copper Nanoparticles in Minimum Quantity Lubrication for Milling of Ti-6Al-4V

Tribological Performance of Different Concentrations of Al2O3 Nanofluids on Minimum Quantity Lubrication Milling

Processing Characteristics of Vegetable Oil-based Nanofluid MQL for Grinding Different Workpiece Materials

A Study on the Effects of Hybridized Metal Oxide and Carbonaceous Nano-Cutting Fluids in the End Milling of AA6082 Aluminum Alloy

Evaluation Of Cutting Force in End Milling Process of Aluminum Alloy 6061-T6 Using Tungsten Carbide Inserts with MQL Method Utilizing Hybrid Nanofluid

Optimal Design of Parameters for the Nanofluid/Ultrasonic Atomization Minimal Quantity Lubrication in a Micromilling Process

Towards sustainable manufacturing: Multiple optimization of surface roughness [math], flank wear [math] in MQL-assisted milling of Titanium Alloy Ti-6Al-4V

Influence of Minimum Quantity Lubrication Parameters on Tool Wear and Surface Roughness in Milling of Forged Steel

Research on surface roughness of high-speed milling 7075-T6 aluminum alloy using nanofluid/ultrasonic atomization minimal quantity lubrication system

Multi-objective optimization of hard milling process of AISI H13 in terms of productivity, quality, and cutting energy under nanofluid minimum quantity lubrication condition

Cold Plasma and Different Nano-Lubricants Multi-Energy Field Coupling-Assisted Micro-Milling of Al-Li Alloy 2195-T8 and Flow Rate Optimization

Machining performance and sustainability analysis of Al2O3-CuO hybrid nanofluid MQL application for milling of Ti-6Al-4V

Mechanism, cutting performance, and tool wear of MQL milling aluminum alloys with dual-nozzle

Ultrasonic assisted nano-fluid MQL in deep drilling of hard-to-cut materials

Assessing the lubrication performance of various vegetable oil-based nano-cutting fluids via eco-friendly MQL technique in drilling of AISI 321 stainless steel