Abstract:Developing ceria-based NH3-SCR catalysts possessing excellent NO conversion, N2 selectivity, and SO2-tolerance at low-temperatures remains a great challenge. Precisely regulating the surface structure of ceria-based NH3-SCR catalysts at the atomic scale is paramount to boosting catalytic performance. Herein, we carried out a combined computational and experimental study to rationally engineer the surface structure of CeTiOx NH3-SCR catalysts and to unravel the reactivity descriptors and structure sensitivity. DFT calculations indicate that the Ti-doped CeO2 solid solution structure not only displays a lower activation barrier for the rate-determining step but also separates the SO2 binding site and the catalytic active site, where the Ti dopant serves as a SO2-trapping site while Ce site neighboring Ti and O vacancy next-neighboring Ti act as the dominant active sites for NH3-SCR. These DFT calculation results successfully guided the design and synthesis of highly effective Ti-doped CeO2 solid solution catalysts, which exhibit superior intrinsic activity and excellent SO2-resistant ability for low-temperature NH3-SCR reaction in comparison with the Ce-Ti catalysts containing an amorphous Ce-O-Ti structure and CeO2-TiO2 interface structure. Both DFT calculations and in situ DRIFTS results validate that the NH3-SCR reaction on Ti-doped CeO2 solid solution dominantly follows the Eley–Rideal mechanism. The combined DFT calculations, H2-TPR, NH3-TPD, and catalyst evaluation results reveal that EH/ENH3 and Evac are the two key reactivity descriptors that determine the overall NH3-SCR reaction on Ce-Ti-based catalysts. A volcano-type relationship between NH3 dissociation activity and EH/ENH3 and a strong linear correlation between N–O bond breaking activity and Evac were established. The superior intrinsic NH3-SCR activity of Ti-doped CeO2 solid solution originates from its moderate EH/ENH3 and Evac values. The role of the Ti dopant in Ti-doped CeO2 solid solution as a SO2-trapping site to protect the catalytic active sites from sulfation was unraveled based on TG, TPDC, and in situ DRIFTS characterizations and DFT calculations. The structure sensitivity of Ce-Ti catalysts in NH3-SCR reaction was analyzed based on the atomic coordination structure, and it was found that the four-coordinated tetrahedron-type Ti configuration in Ti-doped CeO2 solid solution assures its superior catalytic performance.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acscatal.1c00311?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acscatal.1c00311</a>.Catalyst characterization method, optimized structures of NH3-SCR reaction on Ti-doped CeO2 and CeO2–TiO2 interface (Figures S1–S7), catalyst evaluation under a high GHSV value of 90,000 h–1 (Figure S8), SO2+ H2O resistance test (Figure S9), pyridine-adsorbed FTIR and in situ DRIFTS (Figures S10 and S11), correlation between EH and Evac (Figure S12), NO conversion and N2 selectivity on the TiO2/CeO2 catalyst (Figure S13), XPS spectra (Figure S14), in situ DRIFTS under SO2 conditions (Figure S15), BET surface area and pore structure results (Table S1), and comparison of SO2-tolerance with the literature (Table S2) (<a class="ext-link" href="/doi/suppl/10.1021/acscatal.1c00311/suppl_file/cs1c00311_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Amorphous Ce-Ti composite as an efficient bifunctional catalyst for deep oxidation of volatile organic compounds and selective catalytic reduction of NO

Investigation on the redox/acidic features of bimetallic MOF-derived CeMOx catalysts for low-temperature NH3-SCR of NOx

Simultaneous Removal of Naphthalene and NOx over V-Ce/Ti Catalyst: Design of Separated Active Sites for Naphthalene Degradation and SCR Reaction

Catalytic Combustion of VOCs on Pt/CuMnCe and Pt/CeY Honeycomb Monolithic Catalysts

Boosting the Catalytic Performance of CeO 2 in Toluene Combustion via the Ce–Ce Homogeneous Interface

In situ pyrolysis of Ce-MOF to prepare CeO2 catalyst with obviously improved catalytic performance for toluene combustion

TiO2-modified CeVO4 catalyst for the selective catalytic reduction of NOx with NH3

Unraveling Reactivity Descriptors and Structure Sensitivity in Low-Temperature NH 3 -SCR Reaction over CeTiO x Catalysts: A Combined Computational and Experimental Study

The activity and characterization of CeO2-TiO2 catalysts prepared by the sol-gel method for selective catalytic reduction of NO with NH3.

New Insight into the Design of Highly Dispersed Pt Supported CeO2-TiO2 Catalysts with Superior Activity for VOCs Low-Temperature Removal

Activity and Characterization of Ce–Mo–Ti Mixed Oxide Catalysts Prepared by a Homogeneous Precipitation Method for Selective Catalytic Reduction of NO with NH3

Active Site of O2 and Its Improvement Mechanism over Ce-Ti Catalyst for NH3-SCR Reaction

Morphology and Crystal-Plane Effects of CeO2 on TiO2/CeO2 Catalysts During NH3-SCR Reaction

Enhanced catalytic performance for toluene combustion via Ce-doped α-MnO2: efficient balance between toluene adsorption and activation oxidation

A superior CeO2 @TiO2 catalyst with high dispersion of CeO2 for selective catalytic reduction of NOx with NH3

CeO2 doping boosted low-temperature NH3-SCR activity of FeTiOx catalyst: A microstructure analysis and reaction mechanistic study

Comparison Study of the SCR Performance over Mn–TiO 2 and Ce–TiO 2 Catalysts: An Experimental and DFT Study

Discovering Surface Structure and the Mechanism of Graphene Oxide-Triggered CeO 2 –WO 3 /TiO 2 Catalysts for NO Abatement with NH 3

Discovering Surface Structure and the Mechanism of Graphene Oxide-Triggered CeO2-WO3/TiO2 Catalysts for NO Abatement with NH3

Ti species regulated CuO/CeO2 catalyst for efficient simultaneously NH3-SCR denitration and CO oxidation under oxygen-rich conditions

Insight into catalytic performance and reaction mechanism for toluene total oxidation over Cu-Ce supported catalyst