Abstract:This work describes a systematic alloy design strategy resulting in the development of a high strength aluminum alloy adopted for L-PBF. First, based on the composition of a reference Al-Cu-Mg alloy, three Al-Cu-Mg-Mn-Zr-based alloys were investigated using computational thermodynamic tools. Subsequently, the L-PBF processing behavior, microstructure, and concomitant mechanical properties of the L-PBF-fabricated alloys were investigated. Alloys with different compositions showed substantial differences in microstructure: the alloy without Zr addition showed a coarse columnar microstructure and suffered from solidification cracking, alloys with low to mediate Zr additions (1–1.98 wt%) showed a mixed columnar and equiaxed microstructure, while alloys with high Zr addition (3.72 wt%) showed a fully equiaxed microstructure, accompanied by a grain size reduction down to 0.7 ± 0.3 µm. All alloys containing ≥ 1.98 wt% Zr were crack-free. The L-PBF-processed Al-4.40Cu-1.51Mg-1.15Mn-3.72Zr (wt%) alloy showed an extended Zr solid solubility in the Al matrix of ~ 1.3 ± 0.1 wt%. Coherent primary Al3Zr particles with a cubic L12 structure were formed in all the Zr-containing alloys. The mechanical properties of as-built alloys increased consistently with increasing Zr contents from 0 to 3.72 wt%. The designed Al-4.40Cu-1.51Mg-1.15Mn-3.72Zr (wt%) alloy combined a yield strength of 561 ± 24 MPa, an ultimate tensile strength of 580 ± 16 MPa, and an elongation at break of 6.0 ± 1.3%. The exceptionally high strength of this alloy is attributed to a combination of grain refinement, Orowan, solid solution, and dislocation strengthening. The current work shows the intrinsic potential of rapid solidification occurring during L-PBF for the fabrication of geometrically-complex, high-strength lightweight parts made of ultra-fine-grained hyper-peritectic aluminum alloys containing transition element additions.

Characterization of crack-free AA-7075 fabricated by laser powder bed fusion with addition of Zr50.7Cu28Al12.3Ni9 metallic glass

Processing and characterization of crack-free 7075 aluminum alloys with elemental Zr modification by laser powder bed fusion

Laser powder bed fusion of Zr-modified Al–Cu–Mg alloy: Crack-inhibiting, grain refinement, and mechanical properties

Microstructure, mechanical properties, and crack formation of aluminum alloy 6063 produced via laser powder bed fusion

Facile and cost-effective approach to additively manufacture crack-free 7075 aluminum alloy by laser powder bed fusion

Selective laser melting of 7075 aluminum alloy inoculated by Al–Ti–B: Grain refinement and superior mechanical properties

Microstructure characterization and mechanical properties of crack-free Al-Cu-Mg-Y alloy fabricated by laser powder bed fusion

Laser powder bed fusion of crack-free 6061Al alloy using nano-sized TiO 2 modified powders

Microstructural Evolution of a High-Strength Zr-Ti-Modified 2139 Aluminum Alloy for Laser Powder Bed Fusion

Microstructure, tensile strength, and hardness of AA5024 modified with ZrH 4 additions produced by laser powder bed fusion

Laser powder bed fusion of crack-free TiN/Al7075 composites with enhanced mechanical properties

Fabrication of Zr-based bulk metallic glass lattice structure with high specific strength by laser powder bed fusion

Improved strength and ductility on laser beam welded joints of 7085Al matrix nanocomposites by in-situ ZrB 2 nanoparticles and Al 3 (Er, Zr) nanoprecipitates

Effect of Powder Spreading Parameters on Laser Absorption Behavior and Processability of High‐Strength Aluminum Alloy Fabricated by Laser Powder Bed Fusion

Requirements for Processing High-Strength AlZnMgCu Alloys with PBF-LB/M to Achieve Crack-Free and Dense Parts

In situ design of ultrafine-grained 7075 Al alloy with laser powder bed fusion

Stress-relief annealing friendly Fe-based metallic glass-reinforced Al-Si-Mg-Zr alloy fabricated by laser powder bed fusion

Exploiting the rapid solidification potential of laser powder bed fusion in high strength and crack-free Al-Cu-Mg-Mn-Zr alloys

Synergistic strengthening of crack-free Al–Zn–Mg–Cu alloys with hierarchical microstructures achieved via laser powder bed fusion

Achieving superior high-temperature mechanical properties in Al-Cu-Li-Sc-Zr alloy with nano-scale microstructure via laser additive manufacturing

Effect of 0.5 wt% Zr on defects, microstructure and mechanical properties of Al-3.6Zn-0.6Mg alloy fabricated by laser powder bed fusion