Abstract:The large thermal gradient and high cooling rate generated in the fabrication of complex thin-walled components by laser powder bed fusion (LPBF) may cause uncontrolled deformation and reduce dimensional accuracy. The existing preheating-assisted LPBF process is still difficult to fabricate complex thin-walled components to large size (e.g., reach 800 mm) with the required dimensional accuracy and structural properties. To solve this problem, a novel integrated process of LPBF and hot metal gas forming (HMGF) was proposed in this study to fabricate complex thin-walled components. In this process, a preform with a geometrical shape close to the final component is first fabricated by LPBF process, and then this preform is formed into the desired shape by HMGF process. The hot formability of the LPBF AlSi10Mg sheets was investigated to verify the feasibility of this novel forming process. Also, the hot formability was compared with that of gravity cast (GC) AlSi10Mg sheets. The microstructure, phase structure, uniaxial and biaxial hot formability were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), hot uniaxial tensile and hot biaxial gas bulging experiments, respectively. The results indicated that the cellular microstructure of the LPBF AlSi10Mg gradually disappears with the increase in temperature. The LPBF AlSi10Mg sheet exhibits superior mechanical properties to the GC AlSi10Mg sheet due to the mixed strengthening mechanism among strengthening phase precipitation, grain structure and dynamic recrystallization (DRX) degree. For instance, the former demonstrates a total elongation (obtained from hot uniaxial tensile tests) of 81.2% and an ultimate bulging height (obtained from the hot biaxial gas bulging tests) of 12.16 mm; in contrast, the latter's elongation and bulging height are 56.2% and 9.26 mm, respectively. Moreover, the LPBF AlSi10Mg sheet shows more uniform deformation than the GC AlSi10Mg sheet during the bulging tests. The feasibility of forming the LPBF-fabricated preform by HMGF process was confirmed. This lays a foundation for the integrated process of LPBF and HMGF to fabricate complex thin-walled components.

Stress-relief annealing friendly Fe-based metallic glass-reinforced Al-Si-Mg-Zr alloy fabricated by laser powder bed fusion

Manipulating microstructure and mechanical properties of laser powder bed fusion processed hypo-eutectic Al-13.3Mg 2 Si alloy via annealing

Microstructural Evaluation and Tensile Properties of Al-Mg-Sc-Zr Alloys Prepared by LPBF

Effective Control of Microstructure Evolution in AZ91D Magnesium Alloy by SiC Nanoparticles in Laser Powder-Bed Fusion

Development of a high strength Zr/Sc/Hf-modified Al-Mn-Mg alloy using Laser Powder Bed Fusion: Design of a heterogeneous microstructure incorporating synergistic multiple strengthening mechanisms

A high Fe-containing AlSi12 alloy fabricated by laser powder bed fusion

Effect of Aluminium Content and Processing Parameters on the Microstructure and Mechanical Properties of Laser Powder-Bed Fused Magnesium-Aluminium (0, 3, 6, 9wt%) Powder Mixture

Influence of Stress Relief Annealing Parameters on Mechanical Properties and Decomposition of Eutectic Si Network of L-PBF Additive Manufactured Alloy AlSi10Mg

Mechanical Properties of AlSi10Mg Processed by Laser Powder Bed Fusion at Elevated Temperature

Exploiting the rapid solidification potential of laser powder bed fusion in high strength and crack-free Al-Cu-Mg-Mn-Zr alloys

Additive Manufacturing of Al-12Si Alloy by Powder Laser Bed Fusion: an Investigation into its Microstructural Processes Formation and its Effects on Mechanical Behavior

Laser powder bed fusion of Zr-modified Al–Cu–Mg alloy: Crack-inhibiting, grain refinement, and mechanical properties

Role of the solidification cells on the yield strength of the Al-Si-Mg alloy manufactured using laser powder bed fusion: A micropillar compression study

Microstructure and Mechanical Properties of an Al–Mg–Si–Zr Alloy Processed by L-PBF and Subsequent Heat Treatments

Achieving superior high-temperature mechanical properties in Al-Cu-Li-Sc-Zr alloy with nano-scale microstructure via laser additive manufacturing

Formability and microstructure of laser powder bed fused AlSi10Mg alloy sheets under various deformation conditions

A novel laser powder bed fusion Al-Fe-Zr alloy for superior strength-conductivity trade-off

Heat treatment of Al-Cu-Li-Sc-Zr alloy produced by laser powder bed fusion

Effect of heat treatment on the microstructure and mechanical properties of an Al-5Mg2Si-2Mg alloy processed by laser powder bed fusion

Processing defect, microstructure evolution and mechanical properties of laser powder bed fusion Al-12Si alloys

Developing a novel lightweight Al–Mg–Li alloy for laser powder bed fusion additive manufacturing: Parameter optimization, microstructure evolution, and mechanical performance