Abstract:Flat-plate solar collector systems are devices used to convert solar energy to thermal energy. These devices require a selective coating that absorbs all sunlight but does not emit energy in the near IR; hence, a multilayer system of metal/IR-reflector/metal oxide is often used. Many substrates are used, including metals such as copper, stainless steel, and aluminum. Aluminum is an interesting substrate for its lower cost and good optical properties. Electrodeposited materials have gained importance in the industry for the easy handling and good results in scale-up. However, in general it is difficult to electrodeposit onto aluminum due to the ever-present thin insulating oxide film. In this work, we propose an adherent interlayer film based on copper, which is electrodeposited onto aluminum, and serves as a basis for the subsequent electrodeposition of a selective coating consisting of bright nickel and the absorber film of electrodeposited black nickel. Solar collectors based on aluminum substrates and this electrodeposited selective coating are specifically useful for thermo-solar applications at low to medium temperature. Electrochemistry studies including cyclic voltammetry, rotating disk cyclic voltammetry, and galvanostatic curves are carried out for all the different layers. The properties of the coatings are subsequently characterized by reflectance spectra using UV-Vis, NIR and IR spectrophotometers equipped with integrating spheres. The solar absorptance is calculated by weighting the reflectance spectrum against the solar radiation spectrum ASTM G173-03. The thermal emittance is calculated weighting the reflectance spectra against the black body radiation function at 100 °C. The morphology and homogeneity of the film are evaluated with scanning electron microscopy, and energy dispersive spectroscopy. X-ray photoelectron spectrometry is used to determine the film composition. The crystalline structure of the films is studied by X-ray diffraction and Raman measurements. The second and third layer, bright nickel, and black nickel, respectively, are electrodeposited on top of the Cu layer using a previously reported method. We characterize the selective coating electrodeposited onto aluminum/Cu/bright nickel and show that this is a viable technology for the fabrication of low-cost and high efficiency flat plate solar collectors. In addition, we demonstrate the scale-up of the electrodeposition process, and characterize the performance of a complete flat-plate solar collector device of 1.8 m 2 gross area. Acknowledgements The authors gratefully acknowledge CONACYT, Módulo Solar S.A. de C.V. and IER-UNAM for funding through the Mexican Center for Innovation in Solar Energy (CeMIE-Sol), Project P-81.

A Spray-Deposited Modified Silica Film on Selective Coatings for Low-Cost Solar Collectors

(Digital Presentation) Electrodeposition and Characterization of a Selective Coating on Aluminum for Scale-up in Thermo-Solar Applications

Enhanced Performance of Nickel–Cobalt Oxides as Selective Coatings for Flat-Plate Solar Thermal Collector Applications

Scalable All-Ceramic Nanofilms As Highly Efficient and Thermally Stable Selective Solar Absorbers

A Facile One-Step Method to Fabricate Multi-Scaled Solar Selective Absorber with Nano-Composite and Controllable Micro-Porous Texture

Mechanically Robust and Self-Cleaning Antireflective Coatings for Photovoltaic Modules

Spinel Cu-Mn-Cr Oxide Nanoparticle-Pigmented Solar Selective Coatings Maintaining >94% Efficiency at 750 degrees C

Achieving effective performance of silicon solar cell through electrosprayed MgF 2 antireflection coating

Experimental Behavior of Solar Still Using Mixed Oxides Mn-Fe/Silicona Resin Composite as Selective Solar Absorber

Porous Carbon–titania Nanocomposite Films for Spectrally Solar Selective Absorbers

Synthesis and Characterization of Multilayered CrAlN/Al2O3 Tandem Coating Using HiPIMS for Solar Selective Applications at High Temperature

Black Nickel Coatings for Solar Collectors

Anti-Reflection and Self-Cleaning Nanocoating to Improve the Performance of Flat Plate Solar Collector

Low emissivity thin film coating to enhance the thermal conversion efficiency of Selective Solar Absorber in High Vacuum Flat Plate Collectors

A Single Layer of Chromium Oxide Nanoparticles Films Coated with Carbon by Applying Exploding Wire Technique for Efficient Solar Selective Absorber

Performance augmentation strategy of Parabolic trough collector by employing MXene-based solar absorbing coating

Cr-(CrN/TiAlN)m-AlSiN-AlSiO open-air stable solar selective coating for concentrated solar thermal power applications

Hydrophobic and spectrally broadband antireflective methyl-silylated silica coatings with high performance stability for concentrated solar applications

NiCrAlO/Al2O3 Solar Selective Coating Prepared by Direct Current Magnetron Sputtering and Water Boiling

Fostering wider application of anti-soiling strategies in existing solar power plants: A comparative study of novel quaternarized silica hybrids with commercial self-cleaning coatings

Novel highly performing tandem selective solar absorber for industrial heat applications