Abstract:The mechanical properties of nickel-based single crystal superalloys deteriorate with increasing misorientation, thus the finished product rate of the casting of single crystal turbine airfoils may be reduced due to the formation of grain boundaries especially when the misorientation angle exceeds to some extent. To this day, evolution of the microstructures at the grain boundaries with misorientation and the relationship between the microstructures and the mechanical properties are still unclear. In this work a detailed characterization of the misorientation related microstructure at the grain boundary in DD6 single crystal superalloy has been carried out using scanning electron microscopy (SEM) and transmission electron microscopy (TEM) techniques; the elemental distribution at the grain boundaries has been analyzed by energy dispersive (EDS) X-ray mapping; and the effect of precipitation of μ phases at the grain boundary on the mechanical property has been evaluated by finite element calculation. It is shown that the proportion of γ phase at the grain boundaries decreases, while the proportion of γ′ phase at the grain boundaries increases with increasing misorientation; the μ phase is precipitated at the grain boundaries when the misorientation angle exceeds about 10° and thus it could lead to a dramatic deterioration of the mechanical properties, as well as that the enrichment of Re and W gradually disappears as the misorientation angle increases. All these factors may result in the degradation of the mechanical properties at the grain boundaries as the misorientation increases. Furthermore, the finite element calculation confirms that precipitation of μ phases at the grain boundary is responsible for the significant deterioration of the mechanical properties when the misorientation exceeds about 10°. This work provides a physical imaging of the microstructure for understanding the relationship between the mechanical properties and the misorientation of the grain boundaries in the single crystal superalloy. Based on our study we hope that we can offer some scientific basis for further improvement of the nickel-based single crystal superalloys.

Effect of processing current on microstructural evolution and orientation information in Ni-based single crystal superalloy during plasma re-melting

Temperature Effects on Deformation Substructures and Mechanisms of a Ni-based Single Crystal Superalloy

Stray grain formation associated with constitutional supercooling during plasma re-melting of Ni-based single crystal superalloy based on temperature field simulation and actual substrate orientation

Microstructure and Microsegregation in A Ni-Based Single Crystal Superalloy Directionally Solidified under High Thermal Gradient

Experimental Investigation on Plastic Strain and Recrystallization of Single Crystal Nickel Based Superalloys

A Study of the Internal Deformation Fields and the Related Microstructure Evolution during Thermal Fatigue Tests of a Single-Crystal Ni-Base Superalloy

Ultra high-temperature deformation in a single crystal superalloy: Meso-scale process simulation and micro-mechanisms

Processing, Microstructures and Mechanical Properties of a Ni-Based Single Crystal Superalloy

Effect of heat treatment on the microstructural evolution of a nickel-based superalloy additive-manufactured by laser powder bed fusion

Experimental Investigation on Recrystallization Mechanism of a Ni-base Single Crystal Superalloy

Influence of directional solidification variables on the microstructure and crystal orientation of AM3 under high thermal gradient

Misorientation Related Microstructure at the Grain Boundary in A Nickel-Based Single Crystal Superalloy

Plastic Deformation and Recrystallization of a Ni-Based Single Crystal Superalloy

Dendrite evolution and quantitative characterization of γ′ precipitates in a powder metallurgy Ni-based superalloy by different cooling rates

Effect Of Current On Structure And Macrosegregation In Dual Alloy Ingot Processed By Electroslag Remelting

Epitaxial growth behavior and stray grains formation mechanism during laser surface re-melting of directionally solidified nickel-based superalloys

Effect of heating processing on the formation of micro-pores during solution treatment of high generation nickel-based single crystal superalloy

Restoring Plasticity in Nickel‐Based Superalloy Using High‐Density Pulsed Electric Current

Thermal processing behaviour and microstructural evolution of high W and high γ' content extruded nickel-based powder metallurgy superalloy FGH4109

In situ observation of crystal rotation in Ni-based superalloy during additive manufacturing process

Multiphase-field Simulation of the Solution Heat Treatment Process in a Ni-based Superalloy