Abstract:Bed load sediment transport governed by particle saltation in supercritical open channel flows cause bedrock incision in high‐gradient mountain streams, and hydro‐abrasion at hydraulic structures. Hence, a better understanding of turbulent flow characteristics and particle dynamics are of prime importance for the prediction of river and landscape evolution, and for a sustainable design of hydraulic structures. To this end, we experimentally investigated single particle dynamics in supercritical open channel flows over fixed planar and abraded beds covering smooth, transitionally rough, and hydraulically rough regimes. The experiments were performed at the Laboratory of Hydraulics, Hydrology and Glaciology (VAW) of ETH Zürich in a wide range of hydraulic conditions with various channel width‐to‐depth aspect ratios (b/ho) and Froude numbers (F). We investigated the motions of five particle groups differing in shape, hardness, and diameter. By means of a high‐speed camera, the particle velocities and trajectory parameters such as hop height and hop length were determined using Particle Tracking Velocimetry (PTV). The results reveal that at least 120 individual particles should be used in the tests to determine sound statistics of particle trajectories. In the present test conditions, the particles are dominantly transported in saltation. The effects of particle properties such as shape and diameter on the particle trajectories are negligible, while the rolling probability of the particles for a given flow condition increases with increasing diameter. Bed roughness was found to be the key parameter having a significant effect on the saltation trajectories and horizontal energy transfer. Hop height, hop length and particle velocities as well as horizontal energy transfer increase with increasing bed roughness. Based on the saltation trajectory data, non‐dimensional equations are developed for each hydraulic regime and used to enhance the saltation‐abrasion model by Sklar and Dietrich (2004). The present findings contribute to a better understanding of particle motion characteristics under different hydraulic and roughness conditions and their effect on mechanics and prediction of bedrock incision and hydro‐abrasion in three‐dimensional supercritical open channel flows occurring in steeply sloped rivers and at hydraulic structures.

Modifications to the design procedure for grit chambers

A New Definition on Critical State of Granular Media Accounting for Fabric Anisotropy

Aerated Grit Chambers Hydraulic Design Equation

Design, Testing and Operation of Grit Chambers with Hydraulic Roll

Grit particle characterization: influence of sample pretreatment and sieving method

Characterizing the settleability of grit particles

Particle Saltation Trajectories In Supercritical Open Channel Flows: Roughness Effect

Numerical Investigation of the Evolution of Grit Fracture and Its Impact on Cutting Performance in Single Grit Grinding

Experimental Study on the Riverbed Coarsening Process and Changes in the Flow Structure and Resistance in the Gravel Riverbed Downstream of Dams

Comparisons of Sidewall Correction of Bed Shear Stress in Open-Channel Flows

Effect of Grit Chamber Configuration on Particle Removal: Using Response Surface Method

Sidewall and non-uniformity corrections for flume experiments

CFD study of multiphase flow in aerated grit tank

Using nanomaterial to minimize the local scour downstream of sluice gate

Dimensioning of Aerated Grit Chambers and Use as a Highly Loaded Activated Sludge Process

The effect of stress history on the critical shear stress of bedload transport in gravel-bed streams

Comparative study on turbulence models simulating inorganic particle removal in a Pista grit chamber

Experiments of Main Parameters Affecting the Erosive Behavior of Self-Excited Oscillating Abrasive Water Jets: Length of Self-Oscillation Chamber, Jet Pressure, Abrasive Fluid Velocity, and Abrasive Grain Size

On the erosion due to inclined jets

Proposal for New Method for Calculating Sedimentation Process Efficiency in Water Treatment Plants

Two-dimensional numerical simulation of sediment transport using improved critical shear stress methods