Abstract:This study explores advancements in solar distillation, introducing a modified spherical solar still with a rotating ball to overcome traditional limitations of low productivity. The study conducted a comprehensive set of experiments in Kafrelsheikh, Egypt (31.1107° N, 30.9388° E) to compare the performance of the modified spherical distiller with that of the conventional spherical solar still. The evaluation encompassed various aspects, including energy, exergy, economic, and environmental dimensions. Key factors investigated within the study encompassed a range of rotation speeds (0.25, 0.5, 0.75, 1, 1.25, and 1.5 rpm), the introduction of a black jute wick material stretched over the rotating ball, and the utilization of a thermal storage material beneath the rotating ball. Two thermal storage materials were investigated with three arrangements (desert sand, copper grits, and mixture of both). The study's findings have unveiled that the optimal rotation speed for MSSS was 0.75 rpm, where the yield was augmented by 40 %. While incorporating wick material enhanced the distillate of the modified spherical distiller by 57 % when operating at 0.75 rpm. The best operating conditions for the modified spherical distiller were operating at 0.75 rpm and using wick and mixture of copper grits and desert sand, where the distillate reported 7160 ml/m 2 .day versus 3525 ml/m 2 .day for conventional spherical distiller, which means that the distillate was improved by 103 % and efficiency reached 59.5 %. Moreover, the exergy efficiencies for the conventional and modified spherical distillers at 0.75 rpm with thermal storage material, are 3.1 % and 4.2 %, respectively. Also, the cost of producing one liter of distilled water for conventional spherical distiller, modified spherical distiller, and modified spherical distiller with thermal storage material was determined to be 0.043, and $0.024, respectively. Finally, the environmental parameter for modified spherical distiller with thermal storage material amounted to 27.7 tons of CO2 annually. Furthermore, the enviroeconomic parameter (Z') for the conventional spherical distiller and modified spherical distiller with thermal storage material stood at 335 and 365 per year, respectively.

Improvement of the performance of hemispherical distillers through passive and active techniques

Thermoenviroeconomic performance augmentation of solar desalination unit integrated with wick, nanofluid, and different nano-based energy storage materials

Aspects of energy, exergy, economy, and environment for performance evaluation of modified spherical solar still with rotating ball and phase change material

Performance Enhancement of Solar Still Unit Using v-Corrugated Basin, Internal Reflecting Mirror, Flat-Plate Solar Collector and Nanofluids

Investigation of the performance of a double-glazing solar distiller with external condensation and nano-phase change material

Improved Thermal Performance and Distillate of Conventional Solar Still via Copper Plate, Phase Change Material and CuO Nanoparticles

3E analysis of enhancing solar distillation performance through innovative wick convex stepped absorber, PCM, and evacuated tube solar water collector: Experimental investigation

Performance assessment of a novel solar distiller with a fountain-shaped basin design embedded with phase change materials enriched with copper oxide nano-additives: A detailed experimental investigation

Investigating the performance of dish solar distiller with phase change material mixed with Al2O3 nanoparticles under different water depths

Performance optimization study on a novel waste heat flow-based wick-finned distillation system for clean and sustainable pure water production

Experimental investigation on dish solar distiller with modified absorber and phase change material under various operating conditions

Optimizing cord pyramid solar distillers: A comprehensive study on square baffles, reflectors, and phase transition materials

Thermal performance evaluation of a solar air heater integrated with helical tubes carrying phase change material

Innovative integration: Enhancing solar distillation efficiency with modified spherical solar stills

Improving the performance of tubular solar still integrated with drilled carbonized wood and carbon black thin film evaporation

Performance analysis of a solar-driven integrated direct-contact membrane distillation and humidification–dehumidification system

Sustainable and clean water distillation by parabolic dish collector and different heat absorber and thermal storage materials: An experimental study

Innovative configurations for spherical solar distillation: Ball rotation and preheating for improved productivity

Enhancing solar distillation through beeswax-infused tubular solar still with a heat exchanger using parabolic trough collector

Productivity and Thermal Performance Enhancements of Hollow Fiber Water Gap Membrane Distillation Modules Using Helical Fiber Configuration: 3D Computational Fluid Dynamics Modeling

Employing binary/ternary organic blends in integrated HP-assisted HDH desalination systems