Improving the performance of tubular solar still integrated with drilled carbonized wood and carbon black thin film evaporation

Swellam W. Sharshir,A.W. Kandeal,Youssef M. Ellakany,Ibrahem Maher,Ahmed Khalil,Ahmed Swidan,Gamal B. Abdelaziz,Hany Koheil,Maher Rashad

DOI: https://doi.org/10.1016/j.solener.2022.01.065

IF: 7.188

2022-02-01

Solar Energy

Abstract:This paper presented the enhanced thermo-exergoenviroeconomic performance of tubular solar still (TSS) by integrating an eco-friendly, cost-effective, and available material combination. The combination was proposed to obtain thermally enhanced thin-film evaporation. On the one hand, medium-density fiberboard (MDF) carbonized wood was proposed due to its floatability and good capillarity. In addition, carbon black (CB) nanoparticles (NPs) were utilized to enhance the surface thermal characteristic: absorptivity and conductivity. Three experimental cases were investigated to determine the best specifications of the combination: wood thickness and NPs concentration. First, three different standard wood thicknesses (4, 6, and 9 mm) were tested to state the best one, which was 4 mm that achieved a productivity increase of 30.8%. Then, the 4 mm-thick wood was carbonized, drilled, and experimented, which attained 41.9% production augmentation. Finally, the efficacy of six different CB NPs' concentrations (from 20 to 120 g/m2 with a step of 20 g/m2) on the TSS yield was determined. Among them, the best concentration was 80 g/m2, achieving a 67.1 % yield improvement. Analytically, the thermo-exergoeviroeconomic performance was assessed. The results showed maximum improvement ratios of 49.62 and 89.78% for daily energy and exergy efficiencies, respectively. Besides, the economic analysis showed that using the proposed combination could achieve saving in the freshwater price by 32.36% w.r.t conventional TSS. Moreover, from the environmental point of view, the modified TSS can be considered as more eco-friendly than the conventional one as more CO2 could be mitigated. To sum up, from thermo-economic performance, all the resulting data proved that the proposed improvements were very effective and feasible.

energy & fuels