Abstract:Implementing large capacitors in integrated circuits demands an occupation of a relatively significant large silicon area on-chip, which strictly limits the capability of the physical implementation of low-frequency integrated circuits that mostly require high capacitance values to provide large time-constants. Capacitance multipliers have been proposed to overcome this issue to realize high-value active capacitances in a small chip area. This paper proposes a new current-mode ultra-low power capacitance multiplier based on the floating capacitance Super Flipped Current Follower (SFCF) circuit which employs two AB class cascaded stages. The main novel idea behind the proposed circuit is combining the cross-coupling Quasi-Floating Gate (QFG) with the class-AB techniques and employing the Super Flipped Current Follower (SFCF) circuit, to enhance the adjustment efficiency ratio (M) factor, while also achieving a high scaling factor "K". As a result, the proposed circuit achieves higher K value at the lower power and chip size area costs, while providing better adjustment efficiency ratio (M), which realizes a better "capacitance adjustability-power" trade-off. The proposed circuit provides other advantages such as: wide electronic tunability of scaling factor K, large Parallel Load Resistance (PLR) value, small value of Equivalent Series Resistance (ESR), relatively small chip size area, and a high ratio of adjustment efficiency (M). The total power consumption of the proposed circuit is obtained as 101 nW, using a base capacitance (C b ) of 1 pF, which leads to the realization of a maximum achievable equivalent capacitance (C eq ) of 1604 pF. In addition, the performance of the proposed tunable capacitance multiplier is examined in the realization of a wide-tunable low-pass filter structure. Furthermore, the performance robustness of the proposed circuit is investigated by the Monte-Carlo and PVT analyses in different technology corners, which justify the good performance of the proposed circuit that makes it a proper candidate to be used in ultra-low power biomedical signal processing.

A voltage mode grounded capacitance multiplier with widely tunable gain for ultra-low cutoff frequency filter

A new ultra-low power wide tunable capacitance multiplier circuit in subthreshold region for biomedical applications

A 2.1/5.2-NEF/PEF Capacitively Coupled Instrumentation Amplifier with Fast - Settling for Biosensor

1 V 10 GHz CMOS frequency divider with low power consumption

A current mode capacitance multiplier employing a single active element based on Arbel-Goldminz cells for low frequency applications

A CMOS 1.3-1.7GHz Q-Enhanced LC Band-pass RF Filter with 1.5-67% Tunable Fractional Bandwidth

A Low Excitation Working Frequency Capacitively Coupled Contactless Conductivity Detection (C4D) Sensor for Microfluidic Devices

Design of Lossless Negative Capacitance Multiplier Employing a Single Active Element

Voltage-Mode Multifunction and Universal Biquads with Two CFOAs

A 0.3 Similar To 17.2ghz Frequency Divider With Capacitive Degeneration In 130nm Cmos

A 0.5-V Ultra-Low-Power Low-Pass Filter with a Bulk-Feedback Technique

Adaptive Bandwidth Pll With Compact Current Mode Filter

A 0.3∼17.2GHz frequency divider with capacitive degeneration in 130nm CMOS

Ultralow-resistance electrochemical capacitor for integrable line filtering

Low-Voltage Mixed-Mode Analog Filter Using Multiple-Input Multiple-Output Operational Transconductance Amplifiers

A new electrostatic tunable capacitor for wide ranges of applications

0.5 V, Low-Power Bulk-Driven Current Differencing Transconductance Amplifier

Design and simulation of tunable low-pass Gm-C filter with 1 GHz cutoff frequency based on CMOS inventers for high speed telecommunication applications

Single VDGA-Based Mixed-Mode Electronically Tunable First-Order Universal Filter

Feasibility Study of a Capacitive MEMS Filter Using Electrostatic Levitation

An Ultra‐Low‐Temperature Alternating Current Filter