Abstract:Poly(vinyl alcohol-co-ethylene) (EVOH) nanofibrous aerogel (NFA) templates were fabricated through vacuum freeze-drying from EVOH nanofibrous suspensions. Aluminum oxide (Al2O3) layers were deposited onto highly porous templates to form organic–inorganic hybrid aerogels by the atomic layer deposition (ALD) technique. Chemical and physical measurements showed that mechanical properties were improved through ALD. In addition, the surface chemistry of ALD modified aerogels showed a fascinating cyclic change based on the number of ALD deposition cycles. A transition from hydrophilicity to hydrophobicity was observed after a few cycles of ALD coating; however, additional deposition cycles changed the wettability characteristics back to hydrophilicity. This hydrophilic–hydrophobic–hydrophilic variation is shown to be governed by a combination of geometrical and chemical surface properties. Furthermore, the deposited Al2O3 could substantially improve aerogels strength and reduce permanent deformation after cyclic compression. The Young's modulus of aerogels increased from 5.54 to 33.27 kPa, and the maximum stress at 80% strain went up from 31.13 to 176.11 kPa, after 100 cycles of trimethyl-aluminum (TMA)/water ALD. Thermogravimetric analysis (TGA) results confirm that ALD can effectively improve the heat resistance characteristics of polymeric aerogel. The onset temperature and the residual mass increased with increasing numbers of ALD cycles. During pyrolysis, the nanofiber cores were decomposed, and the brittle pure Al2O3 self-supporting nanotube aerogels with the continuous hollow nanotubular network were formed. A coating of continuous thickness Al2O3 layer on individual nanofiber was achieved after 100 ALD cycles. In additional to mechanical strength and physical property changes, the ALD modified aerogel also shows a superhydrophobic and oleophilic surface chemistry, which could potentially be used to remove oils/organic solvents from water. The resultant aerogels exhibit excellent absorption capacity (31–73 g/g) for various liquids, and the material could be reused after distillation or squeezing. A successful scale-up of such materials could provide some insights into the design and development of thermoplastic polymeric NFAs with substantial industrial applications.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsnano.9b09497?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsnano.9b09497</a>.Figures S1–S18 and Tables S1–S5 showing reaction mechanisms, SEM images, AFM images, XPS spectrum, mechanisms of cross-linking and esterification, dynamic water contact angles, wicking properties, photographs of water absorption, cyclic stress–strain curves, TEM images, onset temperature of weight loss stages, thickness of Al2O3 coatings, physical properties, surface average roughness variations, peak BE and atomic ratio of various aerogels, comparison of sorption capacities (<a class="ext-link" href="/doi/suppl/10.1021/acsnano.9b09497/suppl_file/nn9b09497_si_001.pdf">PDF</a>)Movie S1: Dynamic compressive behavior of 6cy-ALD aerogels under a 60% compressive strain (<a class="ext-link" href="/doi/suppl/10.1021/acsnano.9b09497/suppl_file/nn9b09497_si_002.avi">AVI</a>)Movie S2: Canola oil absorbed by 6cy-ALD aerogels (<a class="ext-link" href="/doi/suppl/10.1021/acsnano.9b09497/suppl_file/nn9b09497_si_003.avi">AVI</a>)Movie S3: Chloroform absorbed by 6cy-ALD aerogels (<a class="ext-link" href="/doi/suppl/10.1021/acsnano.9b09497/suppl_file/nn9b09497_si_004.avi">AVI</a>)This article has not yet been cited by other publications.

Enhancing Carbon Fiber Fabrics with ALD AlxOy Coatings: An Investigation of Thickness Effects on Weight, Morphology, Coloration, and Thermal Properties

Conformal And Highly Adsorptive Metal-Organic Framework Thin Films Via Layer-By-Layer Growth On Ald-Coated Fiber Mats

Effect of Al2O3 coating thickness on microstructural characterization and mechanical properties of continuous carbon fiber reinforced aluminum matrix composites

Rapid and Scalable Synthesis of Novel Carboxylated Aramid Nanofibers for Simultaneously Improving the Strength and Toughness of Carbon Fiber/epoxy Laminates

Atomic Layer Deposition onto Thermoplastic Polymeric Nanofibrous Aerogel Templates for Tailored Surface Properties

Effect of Cu coating thickness on carbon fiber surface on microstructure and mechanical properties of carbon fiber reinforced aluminum matrix composites

Effect of surface modification on interfacial microstructures and mechanical properties of continuous CF/Al composites

On demand thermal surface modification of carbon fiber for improved interfacial shear strength

Atomic layer deposition of TiO2 nanolayer coated Vectran fabrics with enhanced UV-blocking performance and structural colors

Improvement of interface between Al and short carbon fibers by α-Al2O3 coatings deposited by sol–gel technology

Effect of Alumina Coating and Extrusion Deformation on Microstructures and Thermal Properties of Short Carbon Fibre–al Composites

Enhanced Interfacial Toughness of Thermoplastic-Epoxy Interfaces Using ALD Surface Treatments

Al/MWCNT Composite Layer Deposition on Aluminum Alloy Substrate by Selective Laser Melting and Flame Spray

Thermal and oxidation protection of carbon fiber by continuous liquid phase pre-ceramic coatings for high temperature application

Mechanism of Suppressing Oxidation of FeAl Molten Droplet by Adding C to Powder and Its Effect on Microstructure and Properties of Plasma-sprayed Coating

Orientation control of carbon fibers and enhanced thermal/mechanical properties of hot-extruded carbon fibers/aluminum composites

Morphology Matters: Surface Properties Inform ALD Deposition and Subsequent Electrochemical Performance in Graphite Substrates

High-surface-area, Iron-Oxide Films Prepared by Atomic Layer Deposition on Γ-Al2o3

Effect of surface functionalization on the surface and inter-facial properties of thermoplastic-coated carbon fibers

Thermal and Mechanical Behavior of APTES-Modified Al2O3-Embedded Unidirectional Carbon Fiber/Epoxy Composites: An Experimental and Statistical Approach

Thermophysical properties of Cu-coated carbon fibers reinforced aluminum matrix composites by stir casting