Abstract:Aluminium metal-matrix composites are broadly employed in industries like aerospace, marine, automobile-sector, and many others, generating a broad research interest. They are preferred for their high strength and low wear rate. This research work is mainly directed towards the fabrication of two types of metal-matrix composite materials using aluminium-alloy 6061(AA6061) as the matrix material and incorporating aluminium oxide (Al 2 O 3 ), aluminium nitride (AlN), and silicon carbide (SiC) as a reinforcement material. AA6061 has been reinforced with Al 2 O 3 and SiC particulates in AS series composites, while AA series composites, AA6061 has been reinforced with Al 2 O 3 and AlN particulates. This hybrid metal composite was constructed using the stir-casting method. These hybrid composites have been investigated for their physical and mechanical characteristics , viz. density, hardness, impact strength , void content, flexural strength, and tensile strength following the ASTM standards. Tribological characteristics of these hybrid composites were performed by Pin-on-disc (POD) tribometer. Taguchi's design of experimental technique was applied taking four factors viz. composition, sliding-velocity (SV), sliding-distance (SD), and load, and each having 4 levels. ANOVA was employed to find out meaningful parameters. SEM analysis of worn-surface was executed to find out the dominant wear mechanism. Experimental density was highest for AS42, and AA42 composites and void content were lowest for the same. Mechanical properties viz. density, hardness, impact strength, void content, flexural strength, and tensile strength were higher than the base alloy. From the response table of Taguchi analysis of AS and AA composite, the load factor significantly impacted the specific wear rate (SWR) to follow filler content (FC). It can be followed from the ANOVA table for AS composite that the load factor had a magnificent impact on the SWR. The SV and SD show no significant effect on SWR.

Thermal and Mechanical Behavior of APTES-Modified Al2O3-Embedded Unidirectional Carbon Fiber/Epoxy Composites: An Experimental and Statistical Approach

Surface-modified alumina nanoparticles-filled aramid fiber-reinforced epoxy nanocomposites: preparation and mechanical properties

Effect of surface functional modification of nano-alumina particles on thermal and mechanical properties of epoxy nanocomposites

Thermal and mechanical characterization of alumina modified multifunctional novolac epoxy nanocomposites

Unravelling the Influence of Surface Modification on the Ultimate Performance of Carbon Fiber/Epoxy Composites

Carbon fiber/epoxy resin/α-aluminum oxide nanocomposites; fabrication, mechanical and thermal analysis

Exploration of Mechanical Attributes, Thermal Behaviors and Atomic Force Analysis of Alkali Treated Hybrid Polyester Composites for an Engineering Application

Mechanical and Thermal Properties of Al2O3-Filled Epoxy Composites

Mechanical and Thermal Properties of Al<sub>2</sub>O<sub>3</sub>-Filled Epoxy Composites

Mechanical (Static and Dynamic) Characterization and Thermal stability of hybrid green composites for Engineering Applications

High-performance thermoplastic polyaryletherketone/carbon fiber composites: Comparison of plasma, carbon nanotubes/graphene nano-anchoring, surface oxidation techniques for enhanced interface adhesion and properties

Mechanical properties of epoxy composites filled with multi-walled carbon nanotube, Nanoaluminum particles and glass fibers at elevated temperatures

Experimental tribological and mechanical behavior of aluminium alloy 6061 composites incorporated ceramic particulates using Taguchi analysis

Evaluation of mechanical and water absorption properties of kevlar/carbon/basalt fibers reinforced nano cellulose particulates Bisphenol-F LY556 epoxy composite

Reinforcement study of anodizing treatment with various temperatures on aluminum substrates for stronger adhesive bonding with carbon fiber composites

Mechanical Enhancement of Carbon Fiber/Epoxy Composites Based on Carbon Nano Fibers by Using Spraying Methodology

Investigation of mechanical properties of alumina nanoparticle-loaded hybrid glass/carbon-fiber-reinforced epoxy composites

Comparative analysis of thermo-physical and mechanical properties of PALF/CF/epoxy resin with and without nano TiO2 filler

Effect of surface modification of aluminum nitride on electrical and thermal characterizations of thermosetting polymeric nanocomposites

Enhancing the Mechanical properties of CF-Reinforced Epoxy Composites through Chemically Surface Modification of Carbon Fibers via Novel Two-Step Approach by Addition of Epichlorohydrin

Integrating Experimental and Computational Analyses for Mechanical Characterization of Titanium Carbide/Aluminum Metal Matrix Composites