Abstract:The thermal characterization of power devices is an inevitable task in the industry. Thermal transient testing is one of the major tools for this characterization, as it is not only capable of giving information about the actual thermal parameters but may also reveal the root cause of potential device failures. The testing may occur on single packages or modules on a dedicated standard test bench, or "in situ", in an actual assembly. The testing process itself is very fast in both cases, on the order of seconds, but the transient measurement needs to be preceded by a calibration step to determine the temperature dependence of a temperature-sensitive parameter (TSP) of the semiconductor device. This may require a long time, as the device has to be measured at many stabilized temperatures, which in the case of power devices may take hours. It also has to be considered that, especially in "in situ" measurements, reaching the highest device temperatures of power devices may even damage other parts of the surrounding electronics. Moreover, the temperature distribution inside a module will be different at calibration time than during operation with the same junction temperature, as bond wires and copper traces do not reach the chip temperature in the latter case. This paper presents a methodology that can be used to replace the lengthy measurement of one parameter at many temperatures with a fast single I–V characteristics measurement at room temperature. Physics-based calculations assign a unique temperature-sensitive parameter to each item of interest in the system. After the presentation of the theoretical background, the usability of the method is demonstrated by verifying measurements on silicon power devices.

Real-time measurement and control of junction temperature of VDMOS in power cycle test

A Novel Method For On-Line Junction Temperature Measurement Of Power Modules

Online monitoring and correction method of threshold voltage in SiC MOSFET power cycling test

Real-Time Measurement of Temperature Sensitive Electrical Parameters in SiC Power MOSFETs

Online Temperature Measurement Method for SiC MOSFET Device Based on Gate Pulse

Online Accurate Measurement of Steady-Thermal Resistance of SiC MOSFETs for DC Solid-State Power Controller

Online Junction Temperature Measurement for SiC MOSFET Based on Dynamic Threshold Voltage Extraction

Online Junction Temperature Measurement of Power Semiconductor Devices

Analytical Prediction of the Thermal Behavior of Semiconductor Power Devices from Room-Temperature I–V Measurements

A Novel Method for Monitoring the Junction Temperature of SiC MOSFET On-line Based on On-state Resistance

A High-Sensitivity Online Junction Temperature Monitoring Method for SiC mosfets Based on the Turn-on DrainSource Current Overshoot

A Low-Cost High-Performance Voltage Sensing Circuit with Proactive Parameter Design Compensation Network for SiC MOSFETs.

Optimization Method and Online Detection of SSPC Transient Temperature Rise

Opto-electric Flash Raman Method for in Situ Measuring Temperature Variation of Power Device with a High Temporal Resolution

An Online Gate Oxide Degradation Monitoring Method for SiC MOSFETs with Contactless PCB Rogowski Coil Approach

Dynamical Junction Temperature Online Extraction With Thermal Sensitive Electrical Parameters for High Power IGBT Modules

A New Measurement of Online Junction Temperature Based on On-state Resistance

Junction temperature monitoring of silicon carbide MOSFET based on turn‐off voltage spike

Online Junction Temperature Extraction of SiC Power mosfets With Temperature Sensitive Optic Parameter (TSOP) Approach

An Online Junction Temperature Monitoring Method for SiC MOSFETs Based on a Novel Gate Conduction Model

An On-Line Detection Optimization Method of SSPC Based on Transient Temperature Analysis