Effect of material and processing parameters on fiber pinning effect and resultant interfacial bonding strength of CF/PEEK bilayer parts in overmolding process

Wei Jiang,Cheng Chen,Tianzhengxiong Deng,Xukang Wang,Zhigao Huang,Helezi Zhou,Huamin Zhou

DOI: https://doi.org/10.1016/j.polymertesting.2022.107509

IF: 5.1

2022-04-01

Polymer Testing

Abstract:The overmolding for thermoplastic composites is an integrated process that can manufacture multilayer parts with complex structures. However, the interfacial bonding strength between layers manufactured by different processes is weak. Here we study how material and process parameters affect the fiber pinning effect and thereby influence the interface binding strength of overmolded bilayer parts. The bilayer parts were prepared by overmolding the short-carbon-fiber-reinforced polyether-ether-ketone (SCF/PEEK) onto the hot-pressed woven-CF/PEEK (WCF/PEEK) laminates. An analytical model showed that the fiber pinning effect was dominated by the fiber content (C f ), interfacial temperature (T i ) and fiber orientation (α xx ). The experimental results showed that a 32% increase in interlaminar shear strength (ILSS) of bilayer parts was achieved by regulating material and process parameters and optimizing the fiber pinning effect. The microstructural characterization shows that the T i dominates the degree of resin fusion near the interface and thereby affects the fiber pinning depth indirectly. The C f not only changes the amount of pinned fiber, but also affects α xx , which was confirmed by nano-CT scan.

materials science, characterization & testing,polymer science