Abstract:Multi-component high-entropy alloys (HEAs) have recently attracted interest in balancing the bottleneck of high hardness and high fracture toughness. This study demonstrates the influence of Si addition to FeCoNiAl HEA fabricated by advanced powder metallurgy. The FeCoNiAlSi x (x = 0, 0.2, 0.4, 0.6, and 0.8 molar ratio) HEA was fabricated by mechanical alloying for 45 h and subsequent powder compact densification by spark plasma sintering (SPS). FeCoNiAlSi x HEA morphology and phase evolution were investigated to understand the influence of Si content on the microstructure, compressive strength, and fracture mechanisms of the FeCoNiAl alloy. The results indicate that FeCoNiAlSi x powders HEAs have single-phase body-centered cubic (BCC) structures. However, densification of powders HEAs facilitates dual-phase face-centered cubic (FCC) and BCC formation in FeCoNiAl, whereas the FCC phase transforms completely to BCC or BCC/B2 with Si addition. The Vickers microhardness of sintered FeCoNiAlSi x HEAs varies from 524 HV (for FeCoNiAl HEA) to 798 HV (for FeCoNiAlSi0.8 HEA). The maximum compressive strength of HEAs varies from 1325 MPa (for FeCoNiAl HEA) to 2031 MPa (for FeCoNiAlSi0.8 HEA), respectively. The absorption energies of FeCoNiAl and FeCoNiAlSi0.2 were 198 and 203 MJ/m3, respectively. In contrast, the absorption energies of FeCoNiAlSi0.6 and FeCoNiAlSi0.8 HEAs reduced drastically (115 and 96 MJ/m3, respectively). The failure mechanism of the FeCoNiAlSi x HEAs was a mixed ductile-brittle fracture in FeCoNiAl. Brittle fracture dominates in FeCoNiAlSi0.2 and FeCoNiAlSi0.4 HEAs. A complete brittle fracture was noticed with river-like patterns in FeCoNiAlSi0.8 HEAs. The results of this investigation suggest that HEAs with different Si molar ratios and tuned phase structures can be used to design high-strength structural alloys for automotive applications.

Microstructure and mechanical properties of Fe50Mn30Co10Cr10 high-entropy alloy with Si addition prepared by laser melting deposition

Microstructural Evolution and Mechanical Properties of Al0.3CoCrFeNiSix. High-Entropy Alloys Containing Coherent Nanometer-Scaled Precipitates

Microstructure evolution and mechanical properties of Al CoCrFeNi high-entropy alloys by laser melting deposition

Preparation and properties of FeNiMnCuC0.2Alx high-entropy alloy

Hot cracking, crystal orientation and compressive strength of an equimolar CoCrFeMnNi high-entropy alloy printed by selective laser melting

Effect of Si addition on microstructure and wear behavior of AlCoCrFeNi high-entropy alloy coatings prepared by laser cladding

Microstructure and Mechanical Properties of FeCoNiCrAlx High-entropy Alloys by Selective Laser Melting

Sustaining Strength-Ductility Synergy of Slm Fe50mn30co10cr10 Metastable High-Entropy Alloy by Si Addition

Exploring strengthening mechanism of FeCoNiAl high-entropy alloy by non-metallic silicon addition produced via powder metallurgy

Microstructure and mechanical properties of Si micro-alloyed (Ti28Zr40Al20Nb12)100-xSix (x=0, 0.1, 0.2, 0.5) high entropy alloys

The Printability, Microstructure, and Mechanical Properties of Fe80−xMnxCo10Cr10 High-Entropy Alloys Fabricated by Laser Powder Bed Fusion Additive Manufacturing

In-situ synthesis of CoCrFeMnNi high-entropy alloy by selective laser melting

Influences of Si and C addition on microstructure and mechanical properties of Fe2.5CoNiCu high-entropy alloy

Microstructure and dislocation density of AlCoCrFeNiSix high entropy alloy coatings by laser cladding

Dynamic mechanical properties and σ precipitates strengthening of a NiCrFeCoMo 0.2 high-entropy alloy additively manufactured by selective laser melting

Microstructures and properties of AlCrFeNiMnx high-entropy alloy coatings fabricated by laser cladding on a copper substrate

(FeCoNi)75Cu25-xSix high entropy alloys prepared by mechanical alloying and spark plasma sintering: Microstructure, deformation behavior and dynamic recrystallization kinetics

Effect of Si element on phase transformation and mechanical properties for FeCoCrNiSix high entropy alloys

Unveiling the Effect of Si on the Microstructure and Properties of AlFeCoCrNi High Entropy Alloy Coating

Effect of metalloid element on the microstructural and mechanical properties of AlCoCrCuFeNi high-entropy alloys

Selective laser melting of AlCoCrFeMnNi high entropy alloy: Effect of heat treatment