Abstract:Three-dimensional (3D) printing technology is serving as a promising approach of fabricating titanium (Ti) and its alloys used for bone tissue engineering. However, the biological inertness nature of Ti material limits its capability to bind directly with the bone tissue. This paper aims to enhance the bioactivity and osteogenesis of 3D printed Ti-6Al-4V implants by constructing a hierarchical micro/nano-topography on the surface. Ti-6Al-4V implants were prepared by the electron beam melting (EBM) technique. A method combining ultrasonic acid etching with anodic oxidation is proposed for surface modification of EBM Ti-6Al-4V implants in this study. The acid etching step was to remove any existent residual powders on the implant's surface and construct micro-pits and-grooves on the EBM microrough surface. Nanotube arrays with a diameter of 40-50 nm were superimposed on the micro-structured substrate via anodic oxidation. The results of in vitro experiments showed that the hierarchical micro/nano-structured surface on Ti-6Al-4V after acid etching and anodic oxidation (AN) promoted the proliferation and osteogenic differentiation of pre-osteoblast cells (MC3T3-E1) via enhancing the surface hydrophilicity and bioactivity compared with the polished Ti surface (P). Micro-CT and histological analysis were used to assess the in vivo osteogenic properties enhancement. The results 8 weeks after the surgery showed the ratio of bone volume to total volume (BV/TV) of AN implant was 43.4%, which represented 1.5 times that of as-printed implants (AM) without any post-treatment. Considerable increment of bone-to-implant contact area was also detected from the micro-CT reconstructed 3D models in comparison with AM implants and acid etched (AE) EBM implants. In conclusion, the hierarchical micro/nano topography generated on the EBM native surface showed an improvement of bioactivity and osteogenic properties, which is expected to accelerate the application of 3D printed orthopedic and dental implants in clinics. Statement of significance: Traditional titanium implants have the nature of biological inertness, which limits their capability to bind directly with the bone tissue. The failure of implants after couple of years of implantation will cause huge pain to the patients. In this work, a surface modification method for 3D printed implants was developed to construct a hierarchical micro/nano-structure. Through the in vitro and in vivo experiments, we proved that this hierarchical micro/nano-structure induced a better promotion effect on osteoblast proliferation and differentiation comparing with untreated surface or polished surface, and was also capable of bolstering the new bone formation, suggesting a potent strategy to improve the biological properties of 3D printed titanium implants. The work is expected to accelerate the application of 3D printed orthopedic and dental implants in clinics.

Enhanced Osseointegration by the Hierarchical Micro-Nano Topography on Selective Laser Melting Ti-6Al-4V Dental Implants

Fabrication and Biological Evaluation of the Coating Co‐doped Strontium and Zinc Nanoparticles on Porous Pure Titanium Surface by Hydrothermal Method

Zinc- and Strontium- Co-Incorporated Nanorods on Titanium Surfaces with Favorable Material Property, Osteogenesis, and Enhanced Antibacterial Activity.

Improved Osseointegration of Selective Laser Melting Titanium Implants with Unique Dual Micro/Nano-Scale Surface Topography

Micro-/nano-topography of selective laser melting titanium enhances adhesion and proliferation and regulates adhesion-related gene expressions of human gingival fibroblasts and human gingival epithelial cells

Improved Osseointegration of 3D Printed Ti-6Al-4V Implant with a Hierarchical Micro/nano Surface Topography: an in Vitro and in Vivo Study.

Development of a novel biomimetic micro/nano-hierarchical interface for enhancement of osseointegration

The Synergistic Effect of Hierarchical Micro/nano-Topography and Bioactive Ions for Enhanced Osseointegration

Enhanced Osteointegration of Hierarchical Structured 3D-Printed Titanium Implants

The Synergistic Effect of 3D-Printed Microscale Roughness Surface and Nanoscale Feature on Enhancing Osteogenic Differentiation and Rapid Osseointegration

Enhanced Osteointegration of Medical Titanium Implant with Surface Modifications in Micro/nanoscale Structures

Nanoscale Modification of Titanium Implants Improves Behaviors of Bone Mesenchymal Stem Cells and Osteogenesis in Vivo.

Novel hydrophilic nanostructured microtexture on direct metal laser sintered Ti-6Al-4V surfaces enhances osteoblast response in vitro and osseointegration in a rabbit model

Enhanced Osteointegration of Tantalum-Modified Titanium Implants with Micro/nano-Topography

Micro- and Nano-Structured 3D Printed Titanium Implants with a Hydroxyapatite Coating for Improved Osseointegration.

Enhanced Biocompatibility and Antibacterial Activity of Selective Laser Melting Titanium with Zinc-Doped Micro-Nano Topography

Effects of the micro-nano surface topography of titanium alloy on the biological responses of osteoblast

Enhancing the Osteogenic Differentiation and Rapid Osseointegration of 3D Printed Ti6Al4V Implants Via Nano-Topographic Modification

Effect of the immune responses induced by implants in a integrated three-dimensional micro-nano topography on osseointegration

Biological and Mechanical Effects of Micro-Nanostructured Titanium Surface on an Osteoblastic Cell Line In vitro and Osteointegration In vivo

Nanotubular Topography Enhances the Bioactivity of Titanium Implants.