Abstract:Currently, domestic and foreign copper smelting waste acid mainly employ sulfuration method to realize the separation of Cu(II) and As(III), facing the problem of unreasonable sulfidizing agent dosage and sulfidation time. If excessive sulfidizing agent dosage or overly long sulfidation time, it will lead to human health threat and large hazardous waste volume. If insufficient sulfidizing agent dosage or overly short sulfidation time, it will cause the waste of copper resources and substandard treatment solution. In this paper, the competitive sulfuration mechanism of Cu(II)/As(III) solution ( C (As(III)) = 10 g/L) with different Cu(II) concentrations is revealed, i.e., when C (Cu(II)) ≥7 g/L, the sulfidation sequence of Cu(II) and As(III) follows the solubility product constant (Ksp); when C (Cu(II)) ≤6 g/L, the precipitation process of Cu(II)/As(III) is dominated by the liquid-phase mass-transfer mechanism (ion diffusion). The sulfide precipitation of Cu(II)/As(III) is a co-deposition process. With the increase of sulfidizing agent dosage ( S/Cu ratio) and sulfidation time ( t ), the Cu(II) concentration gradually decreases to reach complete removal, while the further increase of S/Cu ratio and t leads to the decrease of copper content in the sulfide precipitates. Finally, the methods are demonstrated that detected accurately Cu(II) and As(III) concentrations in a rapid and non-destructive manner. This work not only provides a novel perspective on the efficient separation of Cu(II)/As(III) in copper smelting waste acid, but also opens a unique approach for direct and rapid detection of Cu(II)/As(III) concentration during the sulfuration process. Hence, this research is a guide for the regulating means ( S/Cu and t ) in the actual multi-step sulfuration process of copper smelting waste acid treatment and electrorefining solution purification.

A correction method for the incomplete dissociation of sulfuric acid in the Villermaux-Dushman reaction system

Effects of Intermittent Chemical Dosing on Volatile Sulfur Compounds in Sewer Headspace

Influence of COD/sulfate ratios on the integrated reactor system for simultaneous removal of carbon, sulfur and nitrogen.

Experimental Approaches for Understanding Mixing Performance of A Minireactor

Progress in Viscous Medium Micromixing Process Study

Interference of sulfide with iron ions to the analysis of Cr(VI) by Method 3060a & Method 7196a

Modeling sulfuric acid decomposition in a bayonet heat exchanger in the iodine-sulfur cycle for hydrogen production

Oxidation of Emerging Contaminants by S(IV) Activated Ferrate: Identification of Reactive Species and Mechanisms

Direct determination of high-concentration As(III) by UV high-reference differential absorption spectroscopy for cleaner As(III) removal promotion via sulfurization

An accurate water activity model for sulfuric acid solutions and its implementation on moisture sorption isotherm determination

A novel highly sensitive test reaction for micromixing: Acid‐base neutralization and alkaline hydrolysis of ethyl oxalate

Characterization and modeling of micromixing performance in micropore dispersion reactors

Experimental and Numerical Investigation of Sulfuric Acid Decomposition for Hydrogen Production Via Iodine–sulfur Cycle

A novel design of in-line static mixer for permanganate/bisulfite process: Numerical simulations and pilot-scale testing

Detailed Kinetic Modeling of Homogeneous H2SO4 Decomposition in the Sulfur–iodine Cycle for Hydrogen Production

Determination of the Micromixing Scale in A Microdevice by Numerical Simulation and Experiments

Amended Deviations of Iodometric Method for Determination the Concentration of H_2S in Crude Oil

Efficient recovery of copper resources from copper smelting waste acid based on Cu(II)/As(III) competitive sulfuration mechanism

Experimental investigation of sulfite oxidation enhancement in a micro-pore aeration system

A New "Mix and Measure" Method for Rapid Quantitative Determination of Alkalinity Based on Proton Equilibrium and Definite Integral of Buffer Capacity

Improving Quantification of Hydrogen Peroxide by Synchrotron Vacuum Ultraviolet Photoionization Mass Spectrometry