Abstract:A micromixer is one of the most significant components in a microfluidic system. A three-dimensional micromixer was developed with advantages of high efficiency, simple fabrication, easy integration, and ease of mass production. The designed principle is based on the concepts of splitting–recombination and chaotic advection. A numerical model of this micromixer was established to characterize the mixing performance for different parameters. A critical Reynolds number (Re) was obtained from the simulation results. When the Re number is smaller than the critical value, the fluid mixing is mainly dependent on the mechanism of splitting–recombination, therefore, the length of the channel capable of complete mixing (complete mixing length) increases as the Re number increases. When the Re number is larger than the critical value, the fluid mixing is dominated by chaotic advection, and the complete mixing length decreases as the Re number increases. For normal fluids, a complete mixing length of 500 µm can be achieved at a very small Re number of 0.007 and increases to 2400 µm as the Re number increases to the critical value of 4.7. As the Re number keep increasing and passes the critical Re number, the complete mixing length continues to descend to 650 µm at the Re number of 66.7. For hard-to-mix fluids (generally referring to fluids with high viscosity and low diffusion coefficient, which are difficult to mix), even though no evidence of strong chaotic advection is presented in the simulation, the micromixer can still achieve a complete mixing length of 2550 µm. The mixing performance of the micromixer was also verified by experiments. The experimental results showed a consistent trend with the numerical simulation results, which both climb upward when the Re number is around 0.007 (flow rate of 0.03 μm/min) to around 10 (flow rate of 50 μm/min), then descend when the Re number is around 13.3 (flow rate of 60 µm/min).

Determination of the Micromixing Scale in A Microdevice by Numerical Simulation and Experiments

Mesomixing Scale Controlling and Its Effect on Micromixing Performance

A Novel Passive Micromixer with Modified Asymmetric Lateral Wall Structures

Experimental Study on Micromixing Characteristics of Coaxial Mixer in Solid–Liquid Systems

Experimental and Numerical Investigation on the Scaling-Up of Microsieve Dispersion Mixers

Mixing Characterization and Scaling-Up Analysis of Asymmetrical T-shaped Micromixer: Experiment and CFD Simulation

Characterization and modeling of micromixing performance in micropore dispersion reactors

Micromixing Simulation of Novel Large-Double-Blade Impeller

Progress in Viscous Medium Micromixing Process Study

Numerical Simulation on Fluid Mixing by Effects of Geometry in Staggered Oriented Ridges Micromixers

Macro-micro Modeling Design in System-Level and Experiment for a Micromixer

Numerical simulation on Taylor dispersion enabled micromixture

Experimental study of micro-mixing performance of split and recombine micromixer and interdigital micromixer

Numerical Simulation of the Efficiency of Mixing in Heterogeneous Microchannels with Patterned Surface Potentials

Micromixing within microfluidic devices: Fundamentals, design, and fabrication

Micromixing Intensification Within a Combination of T-Type Micromixer and Micropacked Bed

Design and Scale-Up of a Superb Micromixer with Fan-Shaped Obstacles for Synthesis of Dolutegravir Intermediate

Micromixing Enhancement in a Novel Passive Mixer with Symmetrical Cylindrical Grooves

A Three-Dimensional Micromixer Using Oblique Embedded Ridges

An Investigation of Flow Patterns and Mixing Characteristics in a Cross-Shaped Micromixer within the Laminar Regime

Analysis of Sequential Micromixing Driven by Sinusoidally Shaped Induced-Charge Electroosmotic Flow