Abstract:Niobium consumption has burgeoned owing to the increasing application of niobium in critical industries, including the aerospace and oil and gas industries. Conventional metallurgical technologies and separation methods for niobium extraction use highly concentrated HF, which is hazardous to both humans and the environment. A solvent extraction system comprising trioctyl tertiary amine (N235) and 4-methyl-2-pentanone (MIBK) that can extract and separate niobium from an oxalate-containing H2SO4 solution is proposed in this paper. Niobium solutions tend to contain titanium and iron impurities; therefore, the effects of various conditions on the separation of the three elements were investigated. The extraction mechanism and thermodynamics of the process were also examined. Over 82% niobium was extracted at an organic-to-aqueous phase ratio of 1:1 and the H+ concentration of 8.29 mol/L using an organic phase with 50 vol% N235 and 50 vol% MIBK as the extractants at 20 °C. Only 18.4% titanium and 3.35% iron were co-extracted. Two stripping processes, both of which further separated niobium and titanium, are also proposed herein. The possible composition of the niobium-containing extraction complex was [(R3NH)·NbO(C2O4)2(H2O)2], as supported by a Fourier transform infrared spectroscopy (FT-IR) analysis and ultraviolet–visible (UV–vis) spectrophotometry. The extraction mechanism was inferred to be the association of R3NH+ in N235 with the [NbO(C2O4)2(H2O)2]− from the acidic niobium-containing solution, and the stripping mechanism was concluded to be anion exchange. The enthalpy change (∆Ho) of the extraction system was −11.0 kJ/mol at 288.15–313.15 K, which indicated that niobium extraction from the H2SO4 solution with oxalate using N235 and MIBK was an irreversible exothermic process.

Separation of niobium from chloride media by solvent extraction with dicyclohexyl-18-crown-6

Separation of niobium from chloride media by solvent extraction with dicyclohexyl-18-crown-6

Separation of No-Carrier-Added Radioactive Hafnium From Rock Samples

Separation and extraction of niobium from H2SO4 solution containing titanium and iron impurities

Liquid-liquid extraction of niobium(V) in the presence of other metals with high molecular mass amines and ascorbic acid

Purification of niobium oxide by dissolution and solvent extraction

A novel method for the separation of niobium and titanium from sulfuric acid-oxalate solutions using N235 and MIBK

Extraktion von Elementen mit Dithizon und Diethylammonium-N,N′-diethyldithiocarbamat aus flußsauren Lösungen und ihre Anwendung in der Analyse von Niob

Tracer scale solvent extraction separation of tantalum from niobium using di-(2-ethylhexyl)-phosphoric acid as extractant

Hydrometallurgical Separation of Niobium and Tantalum: A Fundamental Approach

Separation and isolation of tantalum and niobium from tantalite using solvent extraction and ion exchange

Extraction and complex formation of niobium(V) with 3-hydroxy-2-methyl-1-(4-tolyl)-4-pyridone

Solvent Extraction Separation of Niobium(V), Tantalutn(V) or Titanium(IV), and Vanadium(V) by 2′-Hydroxy-4-methoxy-5′-methyl Chalkone Oxime (HMMCO) from Their Binary Mixtures

A Review on the Separation of Niobium and Tantalum by Solvent Extraction

Extraction of chloride complexes of niobium by high-molecular alkylamines

Separation of niobium and tantalum using continuous multistage counter-current solvent extraction with trioctyl amine

CYANEX 925 As Potential Extractant For the Extraction and Separation of Zirconium (IV) And Niobium (V) From nitric acid Solution

Isolation of Zirconium and Niobium from Fission Products by Solvent Extraction with Dilute TBP