Abstract:Niobium consumption has burgeoned owing to the increasing application of niobium in critical industries, including the aerospace and oil and gas industries. Conventional metallurgical technologies and separation methods for niobium extraction use highly concentrated HF, which is hazardous to both humans and the environment. A solvent extraction system comprising trioctyl tertiary amine (N235) and 4-methyl-2-pentanone (MIBK) that can extract and separate niobium from an oxalate-containing H2SO4 solution is proposed in this paper. Niobium solutions tend to contain titanium and iron impurities; therefore, the effects of various conditions on the separation of the three elements were investigated. The extraction mechanism and thermodynamics of the process were also examined. Over 82% niobium was extracted at an organic-to-aqueous phase ratio of 1:1 and the H+ concentration of 8.29 mol/L using an organic phase with 50 vol% N235 and 50 vol% MIBK as the extractants at 20 °C. Only 18.4% titanium and 3.35% iron were co-extracted. Two stripping processes, both of which further separated niobium and titanium, are also proposed herein. The possible composition of the niobium-containing extraction complex was [(R3NH)·NbO(C2O4)2(H2O)2], as supported by a Fourier transform infrared spectroscopy (FT-IR) analysis and ultraviolet–visible (UV–vis) spectrophotometry. The extraction mechanism was inferred to be the association of R3NH+ in N235 with the [NbO(C2O4)2(H2O)2]− from the acidic niobium-containing solution, and the stripping mechanism was concluded to be anion exchange. The enthalpy change (∆Ho) of the extraction system was −11.0 kJ/mol at 288.15–313.15 K, which indicated that niobium extraction from the H2SO4 solution with oxalate using N235 and MIBK was an irreversible exothermic process.

Extraction of chloride complexes of niobium by high-molecular alkylamines

Liquid-liquid extraction of niobium(V) in the presence of other metals with high molecular mass amines and ascorbic acid

Extraction and complex formation of niobium(V) with 3-hydroxy-2-methyl-1-(4-tolyl)-4-pyridone

Studies of Niobium Sorption from Chloride Solutions with the Use of Anion-Exchange Resins

Extraction kinetics of niobium by tertiary amine N235 using Lewis cell

Extraction Equilibrium of Typical Alkali Metals with a Macrocyclic Calixbiscrown Derivative in Two-Phase System HNO3/o-Nitroanisole and HNO3/HCCl3

Separation of niobium from chloride media by solvent extraction with dicyclohexyl-18-crown-6

Extraktion von Elementen mit Dithizon und Diethylammonium-N,N′-diethyldithiocarbamat aus flußsauren Lösungen und ihre Anwendung in der Analyse von Niob

Separation and extraction of niobium from H2SO4 solution containing titanium and iron impurities

Synthesis and advanced dehydrogenation properties of niobium-based ammine borohydride

Purification of niobium oxide by dissolution and solvent extraction

A novel method for the separation of niobium and titanium from sulfuric acid-oxalate solutions using N235 and MIBK

Liquid–liquid extraction of niobium and tantalum from aqueous sulphate/fluoride solutions by a tertiary amine

Aliphatic Non-Chelating Aldoximes as the Effective Extractants for Recovery and Separation of Nickel and Cobalt from Halide and Thiocyanate Solutions

Studies on the electrochemical deposition of niobium oxide

Hydrolysis of acetonitrile in the presence of NbCl5

NbCl5-Mg Reagent System in Regio- and Stereoselective Synthesis of (2Z)-Alkenylamines and (3Z)-Alkenylols from Substituted 2-Alkynylamines and 3-Alkynylols

Highly efficient and selective solvent extraction of zirconium and hafnium from chloride acid solution including amic acid extractant

A Review on the Separation of Niobium and Tantalum by Solvent Extraction