Abstract:Niobium consumption has burgeoned owing to the increasing application of niobium in critical industries, including the aerospace and oil and gas industries. Conventional metallurgical technologies and separation methods for niobium extraction use highly concentrated HF, which is hazardous to both humans and the environment. A solvent extraction system comprising trioctyl tertiary amine (N235) and 4-methyl-2-pentanone (MIBK) that can extract and separate niobium from an oxalate-containing H2SO4 solution is proposed in this paper. Niobium solutions tend to contain titanium and iron impurities; therefore, the effects of various conditions on the separation of the three elements were investigated. The extraction mechanism and thermodynamics of the process were also examined. Over 82% niobium was extracted at an organic-to-aqueous phase ratio of 1:1 and the H+ concentration of 8.29 mol/L using an organic phase with 50 vol% N235 and 50 vol% MIBK as the extractants at 20 °C. Only 18.4% titanium and 3.35% iron were co-extracted. Two stripping processes, both of which further separated niobium and titanium, are also proposed herein. The possible composition of the niobium-containing extraction complex was [(R3NH)·NbO(C2O4)2(H2O)2], as supported by a Fourier transform infrared spectroscopy (FT-IR) analysis and ultraviolet–visible (UV–vis) spectrophotometry. The extraction mechanism was inferred to be the association of R3NH+ in N235 with the [NbO(C2O4)2(H2O)2]− from the acidic niobium-containing solution, and the stripping mechanism was concluded to be anion exchange. The enthalpy change (∆Ho) of the extraction system was −11.0 kJ/mol at 288.15–313.15 K, which indicated that niobium extraction from the H2SO4 solution with oxalate using N235 and MIBK was an irreversible exothermic process.

Extraction kinetics of niobium by tertiary amine N235 using Lewis cell

A novel method for the separation of niobium and titanium from sulfuric acid-oxalate solutions using N235 and MIBK

Separation and extraction of niobium from H2SO4 solution containing titanium and iron impurities

Extraction of chloride complexes of niobium by high-molecular alkylamines

Liquid–liquid extraction of niobium and tantalum from aqueous sulphate/fluoride solutions by a tertiary amine

Extraction kinetics of separating molybdenum(VI) over iron(III) from high acid leach solutions with mixtures of P507 and N235

Purification of niobium oxide by dissolution and solvent extraction

Liquid-liquid extraction of niobium(V) in the presence of other metals with high molecular mass amines and ascorbic acid

A kinetic study of the leaching of a low-grade niobium–tantalum ore by concentrated KOH solution

Extraction and complex formation of niobium(V) with 3-hydroxy-2-methyl-1-(4-tolyl)-4-pyridone

NIOBIUM(V) RECOVERY FROM LEACHING SOLUTION OF TITANIUM WASTES: KINETIC STUDIES

Kinetics and mechanism of Am(III) extraction with TODGA

Nitric Oxide Adsorption on Nb(110) Surface

Investigations on the use of commercial phosphonic acid derivative for the extraction and separation of Zr(IV) and Nb(V) from their admixture in nitric acid solution

Studies on the electrochemical deposition of niobium oxide

Kinetics of pressure leaching of niobium ore by sulfuric acid

Electrochemical Behavior of Niobium Oxide and Titanium Oxide in NaF–Na3AlF6 Molten Salt

STUDIES THE CRUCIAL ROLE OF SELECTION OF EXTRACTANT TO EXTRACT NIOBIUM FROM SULFURYL FLUORIDE SOLUTION AND OPTIMIZATION OF EXTRACTION CONDITIONS

Studies of Niobium Sorption from Chloride Solutions with the Use of Anion-Exchange Resins

Extraktion von Elementen mit Dithizon und Diethylammonium-N,N′-diethyldithiocarbamat aus flußsauren Lösungen und ihre Anwendung in der Analyse von Niob