Abstract:The production of high purity niobium (Nb) or tantalum (Ta) compounds still relies on processes that require highly acidic conditions and concentrated HF or NH4F solutions. Recent progress in the chemistry of group V elements, along with the evolution of the environmental concerns, call for the development of more sustainable industrial processes for these strategic elements. In sharp contrast with the historical fluoride approach chosen by the Nb and Ta refining industry, there has been a recent surge in the literature concerning the chemistry of these elements in diluted alkaline or oxalate media. We here propose an innovative liquid-liquid extraction process that is amenable to separate Nb and Ta from alkaline feed solutions, can be operated at low acidity and that does not require any fluoride-based chemical. The developed strategy is as follows: first, Nb and Ta are co-extracted from their alkaline solution (pH 12) using a quaternary ammonium salt (Aliquat® 336) dissolved in an organic diluent; then, Nb is selectively back-extracted in a mixture of diluted nitric and oxalic acids; and finally, Ta is stripped in a diluted nitric media. The process also affords purifying Nb from Ti, Fe and Na. Following an optimization at laboratory scale, the full process has been validated during continuous running tests (160 h at 1.4 L h−1) using industrial Nb-Ta caustic solutions coming from the development of the so-called Maboumine process. The developed process works at room temperature, low acidity ([H+] < 1 M), exhibits high recovery yields, and allows producing Nb2O5·nH2O with purity higher than 99.5%. The process also yields a tantalum product (Ta2O5·nH2O with >20 wt% Ta) even when starting from a diluted feed (39 ppm Ta). The proposed strategy paves the way for new Nb and Ta hydrometallurgical processes operating under mild chemical environments and represents a concrete alternative to the current fluoride-intensive industrial methods.

STUDIES THE CRUCIAL ROLE OF SELECTION OF EXTRACTANT TO EXTRACT NIOBIUM FROM SULFURYL FLUORIDE SOLUTION AND OPTIMIZATION OF EXTRACTION CONDITIONS

Separation and extraction of niobium from H2SO4 solution containing titanium and iron impurities

Purification of niobium oxide by dissolution and solvent extraction

CYANEX 925 As Potential Extractant For the Extraction and Separation of Zirconium (IV) And Niobium (V) From nitric acid Solution

Studies of Niobium Sorption from Chloride Solutions with the Use of Anion-Exchange Resins

A novel method for the separation of niobium and titanium from sulfuric acid-oxalate solutions using N235 and MIBK

NIOBIUM(V) RECOVERY FROM LEACHING SOLUTION OF TITANIUM WASTES: KINETIC STUDIES

Features of the extraction sulfuric acid-fluoride technology for processing niobium- and tantalum-containing raw materials

Solvent extraction technology for the separation and purification of niobium and tantalum: A review

Recovery of niobium during comprehensive processing of pyrochlore-monazite-goethite ores

Separation of niobium and tantalum using continuous multistage counter-current solvent extraction with trioctyl amine

Process development for the separation of niobium and tantalum from fluoride medium using trioctyl amine and application of Taguchi's method to optimize solvent extraction parameters

Simultaneous Recovery of Niobium and Sulfur from Carbonate Niobite Ore with Flotation

Study of the leaching process for dust chamber sublimates followed by the extraction of niobium and zirconium into solution

Studies for hydrometallurgical processing of titanium-magnesium production sludge with niobium extraction in solution

A fluoride-free liquid-liquid extraction process for the recovery and separation of niobium and tantalum from alkaline leach solutions

Extraktion von Elementen mit Dithizon und Diethylammonium-N,N′-diethyldithiocarbamat aus flußsauren Lösungen und ihre Anwendung in der Analyse von Niob

Liquid-liquid extraction of niobium(V) in the presence of other metals with high molecular mass amines and ascorbic acid

Selective recovery of niobium and tantalum from low-grade concentrates using a simple and fluoride-free process