Abstract:At present, nearly 99% of the world's niobium concentrate is produced by the Catalão and Araxá mines in Brazil and the Niobec mine (St. Honoré) in Canada. In total, Araxá produces approximately 150,000tonnes of niobium per annum (tpa), while Niobec and Catalão produce 5300tpa and 4500tpa, respectively. Niobium recovery at all three operations is near or above 60%, with final concentrates grading 55–65% Nb2O5. The geographic diversification of niobium supply depends on the development of operable beneficiation flowsheets for the upgrading of known niobium deposits worldwide. The beneficiation of niobium oxide ores is predominantly carried out by froth flotation, which generally involves niobium mineral flotation at acid pH using a cationic amine collector. In the case of the Niobec and Catalão mines, there is a reverse gangue mineral flotation step prior to niobium flotation. The main issues associated with currently employed flowsheets are loss of niobium to the gangue mineral concentrate and the slime fraction. Further, there are a number of gaps in understanding with regard to the mechanisms by which amine collectors and auxiliary reagents interact with one another and with niobium minerals. To date, several alternate flotation reagents such as hydroxamates, sulfosuccinates, phosphorous compounds, and hydroxyquinolines have been examined with the aim of improving niobium recovery and concentrate grade in the flotation process. Notably, alkyl hydroxamates were identified in the 1960s as a potential collector for direct niobium mineral flotation eliminating the need to first deslime the ore. Subsequent testwork performed on Niobec ore using this collector has corroborated its effectiveness without desliming. However, due to increased reagent addition requirements when using hydroxamate collectors, the cost benefit of this reagent scheme compared to amine collectors is unclear. Overall, greater understanding of mechanisms at play in currently employed reagent systems is required to effectively improve plant operating conditions and maximize recovery at the industrial scale. Future testwork should also be conducted on real ores using reagents that have been identified as selective collectors at the single mineral flotation level.

Simultaneous Recovery of Niobium and Sulfur from Carbonate Niobite Ore with Flotation

Developing flotation reagents for niobium oxide recovery from carbonatite Nb ores

Niobium oxide mineral flotation: A review of relevant literature and the current state of industrial operations

Selective Flotation Separation of Molybdenite from Chalcopyrite by Ozone Nanobubbles Preconditioning

Recovery of Phosphorite from Coarse Particle Magnetic Ore by Flotation

Extraction of Niobium from the Bayan Obo Tailings by “Flotation—Microwave Magnetic Roasting—Magnetic Separation”

Recovery of niobium during comprehensive processing of pyrochlore-monazite-goethite ores

Simultaneous extraction of uranium and niobium from a low-grade natural betafite ore

Green and Efficient Pre-concentration of Niobium From Low-Grade Niobite via Super Gravity

Recovery Leaching of Niobium from Metallurgical Residues

The Distribution Regularity and Flotation Study of Niobium-Bearing Minerals in Baiyun Obo

Recovery of Rare Earths and Niobium from a Potash Feldspar Ore Beneficiation Tailings

Leaching of Niobium from Low-Grade Refractory Ore Using H2SO4 Roast System

A novel process for recovery of scandium, rare earth and niobium from Bayan Obo tailings: NaCl-Ca(OH)2-coal roasting and acid leaching

Sulfuric acid leaching of low-grade refractory tantalum–niobium and associated rare earths minerals in Panxi area of China

Fundamental Research on Selective Pre-enrichment of Low-Grade Niobium Concentrate from Bayan Obo Mine Via Super Gravity

Separation and extraction of niobium from H2SO4 solution containing titanium and iron impurities

Enrichment of Nb and Ti from carbonatite pyrochlore ore via calcining-slaking followed by gravity separation