Abstract:In this study, we successfully synthesized a TiO2/CuO nanocomposite using the aqueous extract of Impatiens tinctoria A.rich. leaf extract as a capping, reducing, and stabilizing agent for the first time in an environmentally friendly, low-cost, straightforward, and sustainable technique. Numerous characterization techniques such as ultraviolet-visible diffuse reflectance spectroscopy (UV-vis-DRS), photoluminescence (PL), Raman spectroscopy, Fourier-transform infrared (FTIR), energy dispersive X-ray (EDX), transmission electron microscopy (TEM), X-ray diffraction (XRD), scanning electron microscopy (SEM), Brunauer-Emmett-Teller (BET), and high resolution TEM (HRTEM) were used to characterize the obtained TiO2/CuO nanocomposite. XRD verified that the TiO2/CuO nanocomposite has an average crystallite size of about 21 nm. The TEM result revealed an average particle size of 29 nm for the biosynthesized TiO2/CuO NC. The HRTEM analysis showed the presence of polycrystalline structures with the predominant lattice fringes 0.352 and 0.19 which were attributed to anatase phase TiO2 in the crystal plane of (101) and (200), respectively. The lattice fringes for monoclinic CuO were observed with values of 0.213 and 0.252 for the lattice planes of (111) and (111̅), respectively. The photoluminescence spectroscopic analysis revealed that the TiO2/CuO NC showed the lowest intensity compared to the pristine TiO2 and CuO indicating the reduction of exciton recombination in the case of the TiO2/CuO NC. The BET analysis showcased the formation of mesoporous materials with a surface area of 87.5 m2/g. The photocatalytic degradation performance of the biosynthesized TiO2, CuO, and TiO2/CuO nanomaterials against the potentially harmful MB dye was tested using the light source of a 150 tungsten-halogen lamp with a wavelength range of 360-2800 nm. The factors affecting photodegradation efficiencies like catalyst dose (20 mg), dye concentration(15 ppm), pH (9), and reaction time (90 min) were optimized for the degradation of the MB dye. The TiO2/CuO catalyst showed the highest degradation efficiency of 99% under the optimized conditions. The degradation rate of the MB dye in the presence of the TiO2/CuO NC was evaluated and found to be fitted to the pseudo-first-order kinetics with a rate constant of 0.03 min-1. The reusability test of the TiO2/CuO catalyst showed its good stability.

Research upon Cu-Doping Contents in TiO 2 Nanoparticles Incorporated onto Cellulose Nanofibers for Dye Removal and Self-Cleaning Applications

Enhanced Dye Removal and Antibacterial Efficacy of Copper‐Doped ZnO Nanoparticles on Cellulose Nanofibers

Improved Performance of Dye Sensitized Solar Cells Using Cu-doped TiO2 As Photoanode Materials: Band Edge Movement Study by Spectroelectrochemistry

Fabrication and Characterization of Electrospun Cu-Doped TiO2 Nanofibers and Enhancement of Photocatalytic Performance Depending on Cu Content and Electron Beam Irradiation

Enhanced Optical Absorption and Photocatalytic Activity of Cu/N-Codoped Tio2 Nanocrystals

Thiol-Surface-Engineered Cellulose Nanocrystals in Favor of Copper Ion Uptake

Drying cellulose-based materials containing copper nanoparticles

Copper Doping of CdS Nanoflakes and Nanoflowers for Efficient Photocatalytic Degradation of MB and MV Dyes

Eco-Friendly Photocatalytic Solutions: Synthesized TiO 2 Nanoparticles in Cellulose Membranes for Enhanced Degradation of Indigo Carmine Dye

Sono-synthesis of cellulose-TiO2 nanocomposite adsorbent for fast cleaning of anionic dyes containing wastewater

Copper atom-doped g-C3N4 nanocomposites for enhanced photocatalytic degradation of tetracycline

Efficient Fabrication of Cu-Doped TiO2 Nanoparticles for Enhanced Visible Light Photocatalysis and Antimicrobial Efficacy

Cu+-Ti Bimetallic Modified SiO2 Nanospheres Synthesized by "One-Pot" In Situ Reduction Method for Efficiently Removing Tetracycline from Aqueous Solution

In-situ synthesis of Cu2O on cotton fibers with antibacterial properties and reusable photocatalytic degradation of dyes

Influence of Cu-doped TiO2 on its structural and photocatalytic properties

In Situ Synthesis of Cu2O Nanoparticles Using Eucalyptus globulus Extract to Remove a Dye via Advanced Oxidation

Biosynthesis of TiO2/CuO and Its Application for the Photocatalytic Removal of the Methylene Blue Dye

In Situ Synthesis of TiO2/NC on Cotton Fibers with Antibacterial Properties and Recyclable Photocatalytic Degradation of Dyes.

Preparation of ZnO-CuO/cellulose nanocrystals composite toward water treatment

Electrospinning of Cu Doped TiO2 Nanofibers and their Potential Application in Photoanode of Dye-Sensitized Solar Cells

Experimental and DFT + U Investigations of the Cu1-xCdxO Nanoparticles Synthesized for Photocatalytic Degradation of Organic Pollutants: Environmental Application