Abstract:The most common beneficiation method for feldspar is flotation with a cationic (amine) collector under acidic conditions. However, there are several disadvantages to this, such as environmental pollution and equipment corrosion. In order to resolve such problems, it is important to study the flotation of feldspar using anionic collectors under natural pH conditions. The purpose of this paper is to study the effects and mechanism of Fe3+ on flotation separation of feldspar and epidote using sodium oleate (NaOL) at a natural pH. Through flotation experiments, adsorption measurements, zeta potential testing, FTIR analysis and X-ray photoelectron spectroscopy (XPS), the mechanism of Fe3+ on the surface of feldspar and epidote is revealed, and the reason behind the difference in flotation of the two minerals is discussed. The flotation test results show that Fe3+ can significantly improve the flotation behavior of minerals when NaOL is used as a collector under natural pH, and the highest recovery rates of feldspar and epidote are 90% and 43%, respectively. Analysis of the solution and adsorption measurement results show that Fe3+ is adsorbed on the minerals′ surface in the form of Fe(OH)3, which promotes the adsorption of NaOL on the minerals’ surface through Fe(OH)3, activating the flotation of feldspar and epidote. The difference in adsorption of Fe3+ between feldspar and epidote is the reason for this difference in flotation behavior. The results of the zeta potentials show that after being treated with Fe3+, the electrostatic adsorption of NaOL displays a significant negative shift on the surface of feldspar, while there is almost no electrostatic adsorption of NaOL on the surface of Fe3+-treated epidote. FTIR analysis confirmed that the difference in the adsorption of Fe3+ and NaOL on the surface of feldspar and epidote is due to the fact that there are more active particles (metal bonds) on the surface of feldspar than on the surface of epidote, and the properties of these metal bonds can be changed by Fe3+, which allows NaOL to be more easily adsorbed on the mineral surface through –COO−. The possible adsorption form is “mineral-Fe3+–COO−“. Compared with the infrared spectrum of epidote, there is a new absorption peak at 1713.68 cm−1, which can be attributed to the C=O characteristic peak of NaOL in the infrared spectrum of Fe3+–NaOL-treated feldspar, which is why the floatability of feldspar is better than epidote. XPS confirmed that the Fe on the surface of feldspar is Fe3+ in the form of Fe(OH)3, while Fe on the surface of epidote is mainly Fe2O3 (Fe–O) contained in mineral crystals. Furthermore, there is less adsorption of Fe3+ on the surface of epidote, and this discrepancy leads to the difference in the adsorption of NaOL on the minerals’ surface, which itself leads to the difference in flotation behavior between feldspar and epidote. These findings indicate that the flotation separation of feldspar and epidote can be achieved using Fe3+ and NaOL under natural pH. This study may provide a reference for the flotation mechanism of feldspar and epidote under natural pH.

Understanding the activation mechanism of Ca2+ ion in sodium oleate flotation of spodumene: A new perspective

Adsorption Mechanism of New Mixed Anionic/cationic Collectors in a Spodumene-Feldspar Flotation System

Effects of Pb2+ Ions on the Flotation Behavior of Scheelite, Calcite, and Fluorite in the Presence of Water Glass

Enhanced flotation separation of spodumene and albite via selective adsorption of N -hydroxy-9-octadecenamide on the mineral surfaces

Selective flotation separation of spodumene from feldspar using a novel mixed anionic/cationic collector NaOL/ND13

Flotation behavior of oleate and dodecylamine as mixed collector for recovery of lithium and rubidium from low-grade spodumene tailings: Experiment, characterization and DFT calculation

Insights into the influence of calcium ions on the adsorption behavior of sodium oleate and its response to flotation of quartz: FT-IR, XPS and AMF studies

The selective adsorption and flotation separation of spodumene from feldspar using a novel iron-group multiple ligand collector

Study on the mechanism of Ca 2+ selective activation of alkali-corrosion surfaces of spodumene and albite

Novel insights into the role of colloidal calcium dioleate in the flotation of calcium minerals

Method and mechanism of reverse flotation for dephosphorization of spodumene concentrate using sodium alginate as a depressant

Mechanism of Fe(III)-modified silicate in the flotation separation of spodumene and albite: An experimental and theoretical study

Effects of Interfacial Hydroxylation Microstructure on Quartz Flotation by Sodium Oleate

Dodecylphosphonic acid for the separation of spodumene and albite: Flotation behavior and adsorption mechanism

Adsorption mechanisms of activated surface of quartz and feldspar with mixed NaOL/DDA

The evaluation of N-OSS (N-oleoyl sarcosine) as an efficient collector in the flotation of spodumene from albite at low temperature: Experimental tests and atom-level calculation

Flotation behavior and mechanism of α-bromododecanoic acid as collector on the flotation separation of spodumene from feldspar and quartz

The synergetic collecting effect of N-oleoyl sarcosine (N-OSS) and dodecylamine (DDA) on the selective flotation of spodumene from albite

In Situ Adsorption of Mixed Anionic/Cationic Collectors in a Spodumene-Feldspar Flotation System: Implications for Collector Design

Effects and Mechanism of Fe3+ on Flotation Separation of Feldspar and Epidote with Sodium Oleate at Natural pH

Effects of alkali pretreatment on the flotation of spodumene and feldspar