Determination of damage evolution characteristics in granite residual soil shear bands by micro-CT-based advanced digital volume correlation

Chengsheng Li,Lingwei Kong,Bingxin Zhang,Zhijun Liu,Rongjun Shu,Tianguo Li
DOI: https://doi.org/10.1016/j.enggeo.2024.107505
IF: 6.902
2024-04-17
Engineering Geology
Abstract:Determining the evolution characteristics of cracks and shear bands is important for understanding the damage mechanisms of geotechnical materials. However, there are few experimental studies on the mesoscopic evolution characteristics of cracks in shear bands. In this study, micro-chromatography (micro-CT) is used to evaluate the triaxial test processes of granite residual soil samples under confining pressures of 50 kPa, 100 kPa, 200 kPa and 300 kPa. Then, advanced digital volume correlation (DVC) is used to obtain three-dimensional strain fields and shear bands at different test loading stages, the evolution characteristics of cracks inside and outside the shear band are further measured basis on this. The results indicate that, if the maximum gradient region of the crack distribution in the initial state of the sample can form a trend surface similar to the "interface", then the shear band may be generated in this region. After the formation of the shear band, the penetration degrees of the shear bands are similar to an S curve with the increasing axial strain. The crack volume densities of the shear bands are obviously smaller than those of whole specimens. The crack volume densities on the shear bands first decrease rapidly and then increase gradually with increasing axial strain, and the increasing rate decreases with increasing confining pressure. Among the various crack types on the shear bands, the volume contents of brand-new cracks increase the fastest and exceed half, indirectly reflecting the severe deformation characteristics on the shear bands.
geosciences, multidisciplinary,engineering, geological
What problem does this paper attempt to address?