Abstract:We employed a novel combination of digital image correlation (DIC) and grain-based hybrid finite–discrete element method (GB-FDEM) to improve the comprehension of the relationships between microstructural features and the mechanical properties of granitic rocks. DIC and numerical results showed that macrocracks initiated and propagated along grain boundaries among different minerals driven by the high stiffness contrast between the compliant biotite and the stiffer feldspar/quartz grains. Surface deformation analyses revealed that tensile-dominated macrocracks open at monotonically increased rates before the crack damage threshold, and the opening accelerated afterwards with the increased shear component. The onset of the acceleration of the opening rate of macrocracks can be used to infer the crack damage threshold. Both strain and acoustic emission were used to infer damage stress thresholds in the synthetic numerical samples. Numerical results showed that the damage stress thresholds and uniaxial compressive strength decrease with increasing grain size following log-linear relations. Coarse-grained samples tend to fail by axial splitting, while fine-grained samples fail by shear zone formation. Biotite and quartz contents significantly affect mechanical properties, while quartz to feldspar ratio is positively related to the mechanical properties. Our study demonstrates the capacities of DIC and GB-FDEM in inferring damage conditions in granitic rocks and clarifies the microstructural control of the macroscopic mechanical behaviors. Our results also provide a comprehensive understanding of the systematics of strain localization, crack development, and acoustic emission during the rock progressive failure process.

What problem does this paper attempt to address?

The problem that this paper attempts to solve is to evaluate the damage stress threshold and mechanical properties of granite by combining Digital Image Correlation (DIC) and Grain - Based Hybrid Finite - Discrete Element Method (GB - FDEM). Specifically, the research aims to: 1. **Evaluate the damage stress threshold**: Use DIC and GB - FDEM techniques to determine the damage stress threshold of granite in uniaxial compression tests. These thresholds are important parameters for rock damage assessment and failure prediction. 2. **Understand the relationship between microstructure and macroscopic mechanical properties**: Explore how the stiffness contrast between mineral grains in granite affects the initiation and propagation of macroscopic cracks. In particular, the influence of the stiffness differences between different minerals (such as biotite and feldspar/quartz) on crack initiation and propagation was studied. 3. **Analyze the particle size effect**: Study the variation laws of the damage stress threshold and uniaxial compressive strength of granite samples with different particle sizes in uniaxial compression tests. The paper points out that the damage stress threshold and uniaxial compressive strength decrease logarithmically and linearly with the increase of particle size. 4. **Explore the influence of mineral composition**: Analyze the influence of biotite and quartz content on the mechanical properties of granite, and the positive correlation between the ratio of quartz to feldspar and mechanical properties. 5. **Verify the numerical simulation results**: Calibrate and verify the numerical model through experimental data to ensure the accuracy of the numerical simulation results. ### Key findings - **Crack initiation and propagation**: Macroscopic cracks mainly initiate and propagate along the boundaries of mineral grains, especially between biotite and feldspar/quartz grains with large stiffness differences. - **Damage stress threshold**: Through strain field and acoustic emission data, the damage stress threshold can be inferred. The acceleration of the crack opening rate can be used as a sign of the damage stress threshold. - **Particle size effect**: The damage stress threshold and uniaxial compressive strength decrease logarithmically and linearly with the increase of particle size. Coarse - grained samples tend to split axially, while fine - grained samples form shear bands. - **Mineral composition influence**: The content of biotite and quartz significantly influences the mechanical properties, and the ratio of quartz to feldspar is positively correlated with the mechanical properties. ### Method overview - **Experimental part**: Four coarse - grained granite samples were prepared, uniaxial compression tests were carried out, and the surface deformation was recorded using DIC technology. - **Numerical simulation**: Synthetic granite samples were generated using the GB - FDEM method, numerical simulations were carried out, and the micromechanical parameters of mineral grains and grain boundaries were calibrated. ### Conclusion This research shows the potential of DIC and GB - FDEM techniques in evaluating the damage conditions of granite, clarifies the controlling role of microstructure on macroscopic mechanical behavior, and provides a comprehensive understanding of strain localization, crack development and acoustic emission systematics during the progressive failure process of rocks.

Evaluation of Damage Stress Thresholds and Mechanical Properties of Granite: New Insights from Digital Image Correlation and GB-FDEM

An experimental investigation on the damage of granite under uniaxial tension by using a digital image correlation method

Modeling Crack Propagation in Heterogeneous Granite Using Grain-Based Phase Field Method

Crack propagation process in double-flawed granite under compression using digital image correlation method and numerical simulation

Quantifying the Progressive Fracture Damage of Granite Rocks by Stress–Strain, Acoustic Emission, and Active Ultrasonic Methods

Investigation of Damage Evolution in Heterogeneous Rock Based on the Grain-Based Finite-Discrete Element Model

Experimental Investigation of Mechanical and Fracture Behavior of Parallel Double Flawed Granite Material under Impact with Digital Image Correlation

Digital Fracture Surface Morphology and Statistical Characteristics of Granite Brazilian Tests after Non-Steady-State Thermal Disturbance

Numerical investigation of the effects of the micro-parameters of the transgranular contact on the mechanical response of granite

Quantitative investigation of crack propagation and fracture mechanism of fissured granite from the mesoscopic perspective

Correlations between mineral composition and mechanical properties of granite using digital image processing and discrete element method

Correlational Fractal Characteristics and Damage Progression of Granite with Different Grain Sizes Based on Acoustic Emission Monitoring

Mechanical and cracking behavior of granite specimens containing various inclusions

Characteristic stress variation and microcrack evolution of granite subjected to uniaxial compression using acoustic emission methods

Experimental Study on Cracking Process and Fracture Properties of Granite under Mode I Loading by Acoustic Emission and Digital Image Correlation

Evolutionary Analysis of Heterogeneous Granite Microcracks Based on Digital Image Processing in Grain-Block Model

Experimental Study on Mechanical Properties and Failure Laws of Granite with Artificial Flaws under Coupled Static and Dynamic Loads

Investigation of the dynamic behavior and fracturing mechanism of granite

Role of Loading Rate on Cracking Behavior in Granite Disks With Laboratory Experiments and Grain‐Based Modeling

Fatigue Damage Mechanism and Deformation Behaviour of Granite Under Ultrahigh-Frequency Cyclic Loading Conditions

Determination of damage evolution characteristics in granite residual soil shear bands by micro-CT-based advanced digital volume correlation