Abstract:Purpose: Shaping and assembling contemporary external fixators rapidly for the severe mandibular fractures remains a challenge, especially in emergency circumstance. We designed a novel external fixator that incorporates universal joints to provide the stabilization for mandibular comminuted fractures. This study aims to confirm the efficacy of this novel external fixator through biomechanical tests in vitro and animal experiments. Methods: In vitro biomechanical tests were conducted using 6 fresh canine with mandibular defect to simulate critical comminuted fractures. Three mandibles were stabilized by the novel external fixator and other mandibles were fixed by 2.5 mm reconstruction plates. All fixed mandibles were subjected to loads of 350 N on the anterior regions of teeth and 550 N on the first molar of the unaffected side. The stability was evaluated based on the maximum displacement and the slope of the load-displacement curve. In animal experiments, 9 beagles with comminuted mandibular fractures were divided into 3 groups, which were treated with the novel external fixation, reconstruction plate, and dental arch bar, respectively. The general observation, the changes in animals' weight, and the surgical duration were recorded and compared among 3 groups. The CT scans were performed at various intervals of 0 day (immediately after the surgery), 3 days, 7 days, 14 days, 21 days, and 28 days to analyze the displacement of feature points on the canine mandible and situation of fracture healing at 28 days. The statistical significance was assessed by the two-way analysis of variance test followed by the Bonferroni test, enabling multiple comparisons for all tests using GraphPad Prism10.1.0 (GraphPad Inc, USA). Results: The outcomes of the biomechanical tests indicated that no statistically significant differences were found in terms of the maximum displacement (p = 0.496, 0.079) and the slope of load displacement curves (p = 0.374, 0.349) under 2 load modes between the external and internal fixation groups. The animal experiment data showed that there were minor displacements of feature points between the external and internal fixation groups without statistic difference, while the arch bar group demonstrated inferior stability. The CT analysis revealed that the best fracture healing happened in the internal fixation group, followed by the external fixation and arch baring at 28 days after fixation. The external fixation group had the shortest fixation duration (25.67 ± 3.79) min compared to internal fixation ((70.67 ± 4.51) min, p < 0.001) and arch baring ((42.00 ± 3.00) min, p = 0.046). Conclusion: The conclusion of this study highlighted the efficacy and reliability of this novel external fixator in managing mandibular fractures rapidly, offering a viable option for the initial stabilization of comminuted mandibular fractures in the setting of emergency rescue.

Role of finite element analysis for selection of single point fixation in zygomaticomaxillary complex fracture

Stress analysis on three dimensional finite element model of zygomatic complex fracture fixation

Modeling stability post zygomatic fracture reconstruction

A Study of Fractured Cranial Flap Refixation.

Feasibility of 2-Point Fixation by Absorbable Plates Using the Transoral Approach in Management of the Zygomatic Complex Fractures

Finite Element Analysis of Two- and Three-Dimensional Fixation in Treating Mandibular Symphyseal Fracture Combined with Bilateral Condylar Intracapsular Fractures.

Stability of different fixation methods after reduction malarplasty under average and maximum masticatory forces: a finite element analysis

Biomechanical evaluation of various rigid internal fixation modalities for condylar-base-associated multiple mandibular fractures: A finite element analysis

[Study on biomechanical stability in simulated femoral neck fracture fixation by two cannulated screws].

Biomechanical assessment of mandibular fracture fixation using finite element analysis validated by polymeric mandible mechanical testing

Comprehensive biomechanical analysis of three clinically used fixation constructs for posterior malleolar fractures using cadaveric and finite element analysis

An in-vitro evaluation of a novel design of miniplate for fixation of fracture segments in the transition zone of parasymphysis-body region of mandible using finite element analysis

Finite element analysis of fixation stability according to reduction position for internal fixation of intertrochanteric fractures

A Novel Minimally Invasive and Cost-Effective Internal Fixation of the Le Fort I Fracture by Using Intermaxillary Fixation Screw and Wire: A Technical Note

Finite Element Analysis of Three Internal Fixations for the Posteromedial Split Fracture Fragment in Tibial Plateau Fractures

COMPARISON BETWEEN PERPENDICULAR AND CONVENTIONAL FIXATION IN SYMPHYSEAL AND PARA SYMPHYSEAL MANDIBULAR FRACTURES (RANDOMIZED CONTROLLED TRIAL)

Biomechanical Analysis and Comparison Between "Zeta" Miniplate Design & Conventional Miniplate System for Fixation of Fracture Segments in Transition Zone of Parasymphysis Body Region of Mandible – An In-Vitro Study

An experimental study of a novel external fixator based on universal joints for the rapid initial stabilization of mandibular comminuted fractures

Evaluation of grafts fixation techniques for temporomandibular joint reconstruction with medial femoral condyle flap: A numerical study

The biomechanical evaluation of metacarpal fractures fixation methods during finger movements: a finite element study

Preoperative evaluation and surgical technique of functional and cosmetic aspects in zygomatic complex fracture patients