Influence of in situ formed spinel in bonding phase on mechanical properties and air permeability of magnesia–chrome porous purging materials

Yi An,Hao Liu,Zhou-fu Wang,Yan Ma,Xi-tang Wang
DOI: https://doi.org/10.1007/s42243-023-01168-0
2024-02-27
Journal of Iron and Steel Research International
Abstract:Magnesia–chrome porous purging plugs are crucial functional components to remove inclusions and stabilize the flow field during iron and steel smelting. However, practical applications of magnesia–chrome porous purging materials are still hampered by the poor scouring resistance to molten steel and unstable air permeability owing to their low mechanical properties and uncontrollable pore structure. Therefore, the particle-packing type magnesia–chrome porous purging materials reinforced by in situ formed spinel were prepared using fused magnesia–chrome particles and Al powders as major raw materials. The results show that in situ formed spinel solid solutions in bonding phase led to the decreased median pore size and increased pore surface fractal dimension from the reactions between Al powders and magnesia–chrome particles and along with high-temperature sintering, bonding between magnesia–chrome particles and the resultant mechanical properties of materials were greatly elevated. Besides, the results of air permeability tests and polynomial fitting indicated that the formation of spinel solid solutions was the main contributing factor for controllable air permeability, and pressure drop of porous purging materials was positively correlated with surface fractal dimension of pores. Moreover, the as-prepared porous purging materials added with 6 wt.% Al powders obtained the maximum cold crushing strength (54.2 MPa) and hot modulus of rupture (12.9 MPa) with median pore size of 24.06 μm and fitting non-Darcian permeability coefficient of 0.97 × 10−6 m.
metallurgy & metallurgical engineering
What problem does this paper attempt to address?