Abstract:Grid fin is widely used in the field of aerospace because of its unique advantages in the aerodynamic and structural performance. Meanwhile, the aerodynamic and structural characteristics of the grid fin are quite different from those of the conventional rudder. Deep understanding of the aeroelastic characteristics and mechanism of the grid fin is of great reference value for the fine design of grid fin. In this paper, an efficient reduction-order-method-based aeroelastic analysis method is established, and the method is verified by the flutter case of AGARD 445.6 wing. Finally, based on this method, the flowfield characteristics and the variation of flutter characteristics with Mach number are studied in detail. The results show that in the subsonic region, the transonic flutter "dip" of the grid fin occurs earlier than that of the conventional wing due to the acceleration effect of the grid fin on the airflow. In the transonic region, when the flowfield is characterized by a bow shock wave, the critical flutter speed increases slightly with the increase of Mach number. However, in the supersonic region, when the flowfield is characterized by an oblique shock wave, the flutter critical velocity increases substantially with the increase of Mach number. It is found that the variation law of the flutter boundary with Mach number is very similar to that of the normal force and the pitching moment with Mach number, and there is a close relationship between them. The ratio of flutter speed of the grid fin to the freestream velocity will reach the minimum value near Ma=1.6 . At the same time, it is discovered that the flutter instability of the grid fin is mainly caused by the coupling of the bending mode and torsional mode of the grid fin, and the instability mode is the torsional mode. Meanwhile, it should be noted that the flutter coupling characteristics of the grid fin differ greatly from those of the conventional rudder surface due to the great difference in structural characteristics and unsteady aerodynamic characteristics.

Experimental analysis of cell pattern on grid fin aerodynamics in subsonic flow

Aerodynamics Analysis of Grid Fins Inner Lattice Structure in Cruise Missile

Numerical Analysis of Static and Dynamic Performances of Grid Fin Controlled Missiles

Numerical studies of static aeroelastic effects on grid fin aerodynamic performances

Numerical Investigation of Aeroelastic Characteristics of Grid Fin

The Research Analysis of Aerodynamic Numerical Simulation of Grid Fin

Aerodynamic Study of Various Fins for Missile Body

Research on the Effect of Lateral Jet on the Flow Field and Aerodynamic Characteristics of Projectile with Grid Fins

Research on the Hydrodynamic Characteristics of Cavitating Grid Fins

Cavitaing Grid Gin Hydrodynamics for Missile Applications

Effectiveness of multiple jets for a finned large slenderness ratio missile in supersonic crossflows

Nonlinear Aerodynamic Modeling of Cascade Fins And Delta-Wing Aircraft Model

Parametric study of different fins for a rocket at supersonic flow

Mesh and model requirements for capturing deep-stall aerodynamics in low-Mach-number flows

Numerical and Experimental Study on Flow Loss Reduction Effect of Micro-Textured Surface on Compressor Cascade

Grid Convergence Study on a Finite Volume Code NSAWET

Aerodynamic Characterization of a Generic High-Speed Projectile Configuration

Investigation of Asymmetric Flow of a Slender Body with Low-Aspect Ratio Fins Having Large Deflection Angles

Heat and Flow Characteristics of Aerofoil-Shaped Fins on a Curved Target Surface in a Confined Channel for an Impinging Jet Array

High-fidelity surface flow data-driven aerodynamic solution strategy for non-smooth configurations: Study of compressor cascade with micro riblet surface

Correlation Development and Parametric Investigation for Thermal–hydraulic Characteristics of Flying-Wing Fin