Abstract:Grid fin is widely used in the field of aerospace because of its unique advantages in the aerodynamic and structural performance. Meanwhile, the aerodynamic and structural characteristics of the grid fin are quite different from those of the conventional rudder. Deep understanding of the aeroelastic characteristics and mechanism of the grid fin is of great reference value for the fine design of grid fin. In this paper, an efficient reduction-order-method-based aeroelastic analysis method is established, and the method is verified by the flutter case of AGARD 445.6 wing. Finally, based on this method, the flowfield characteristics and the variation of flutter characteristics with Mach number are studied in detail. The results show that in the subsonic region, the transonic flutter "dip" of the grid fin occurs earlier than that of the conventional wing due to the acceleration effect of the grid fin on the airflow. In the transonic region, when the flowfield is characterized by a bow shock wave, the critical flutter speed increases slightly with the increase of Mach number. However, in the supersonic region, when the flowfield is characterized by an oblique shock wave, the flutter critical velocity increases substantially with the increase of Mach number. It is found that the variation law of the flutter boundary with Mach number is very similar to that of the normal force and the pitching moment with Mach number, and there is a close relationship between them. The ratio of flutter speed of the grid fin to the freestream velocity will reach the minimum value near Ma=1.6 . At the same time, it is discovered that the flutter instability of the grid fin is mainly caused by the coupling of the bending mode and torsional mode of the grid fin, and the instability mode is the torsional mode. Meanwhile, it should be noted that the flutter coupling characteristics of the grid fin differ greatly from those of the conventional rudder surface due to the great difference in structural characteristics and unsteady aerodynamic characteristics.

Parametric study of different fins for a rocket at supersonic flow

Correlation Development and Parametric Investigation for Thermal–hydraulic Characteristics of Flying-Wing Fin

Effectiveness of multiple jets for a finned large slenderness ratio missile in supersonic crossflows

Aerodynamic Study of Various Fins for Missile Body

A Comparative Analysis of Aerodynamic Performance: Straight Fin and Curved Fin Rockets using Computational Fluid Dynamics (CFD)

NUMERICAL STUDIES ON THE PROPULSION AND WAKE STRUCTURES OF FINITE-SPAN FLAPPING WINGS WITH DIFFERENT ASPECT RATIOS

Numerical studies of static aeroelastic effects on grid fin aerodynamic performances

Aerodynamic Characterization of a Generic High-Speed Projectile Configuration

Investigation of Asymmetric Flow of a Slender Body with Low-Aspect Ratio Fins Having Large Deflection Angles

Optimal Selection of Active Jet Parameters for a Ducted Tail Wing Aimed at Improving Aerodynamic Performance

Parametric study on the aerodynamic performance of a ducted-fan rotor using free-form method

Experimental Study on Heat Transfer and Flow Resistance Characteristics of Louver Fins

Heat transfer and pressure drop characteristic research of sine wavy flying-wing fins

Aerodynamics Analysis of Grid Fins Inner Lattice Structure in Cruise Missile

Study on Formation of EFP with Fins of Hexagonal Liner

Numerical Evaluations Of The Effect Of Leading-Edge Protuberances On The Static And Dynamic Stall Characteristics Of An Airfoil

Experimental and numerical flutter analysis of a folding fin with multiple asymmetric free-plays

Parametric Study on Aerodynamic Performance of a Flapping Wing Rotor MAV Capable of Sustained Flight

Aerodynamic Shape Optimization of Subsonic/Supersonic Flows Integrating Variable-Fidelity Longitudinal Trim Analysis

Numerical Investigation of Aeroelastic Characteristics of Grid Fin

CFD-based study of several geometrical parameters of winglet