Abstract:Polysiloxane with multiple acryloxyl groups at the terminal site of the polymer chain was synthesized by the condensation reaction between hydroxyl-terminated polysiloxane and acryloyl chloride and used to improve the cross-linking density of UV-curable silicone materials initiated from dual acryloxy-terminated symmetric polysiloxane or single acryloxy-terminated asymmetric polysiloxane with the mixture of Irgacure 1173 and Irgacure 184 at a mass ratio of 1:1 as the photoinitiator. The effects of factors such as initiator composition, UV irradiation time, structure, and molecular weight of linear dual acryloxy-terminated or single acryloxy-terminated asymmetric siloxane oligomers on the gelation yield, thermal properties, water absorption, and water contact angle of UV-cured film were investigated. The synthesized cross-linking density modifier can be copolymerized with acryloxy-functionalized linear polysiloxanes under the action of a photoinitiator to increase the cross-link density of UV-cured products effectively. Both linear dual acryloxy-terminated or single acryloxy-terminated asymmetric siloxane oligomers can be copolymerized with cross-link density modifiers within 20 s of UV irradiation. The gelation yields of the UV-cured products obtained from the dual acryloxy-terminated siloxane oligomers were greater than 85%, and their surface water contact angles increased from 72.8° to 95.9° as the molecular weight of the oligomers increased. The gelation yields of UV-cured products obtained from single acryloxy-terminated asymmetric siloxane oligomers were less than 80%, and their thermal stabilities were inferior to those obtained from the dual acryloxy-terminated siloxane oligomers. However, the water contact angles of UV-cured products obtained from these single acryloxy-terminated asymmetric siloxane oligomers were all greater than 90°.

Curing reactions of liquid hydridopolycarbosilanes with vinyl or allyl groups

Allyl-Substituted Hydridopolycarbosilane with Low Curing Temperature and High Ceramic Yield under a Redox Initiation System

A novel high reactive initiator system of vinyl‐substituted hydridopolycarbosilane (VHPCS) for lower curing temperature and higher ceramic yields

Novel Diacetylinic Aryloxysilane Polymers: A New Thermally Cross-Linkable High Temperature Polymer System

Studies on Cure Kinetics of Diglycidyl Ether of 4,4′-Bisphenol/4,4′-diaminobiphenyl Using the Advanced Isoconversional Method

Synthesis and Curing of a Novel Combined Liquid Crystalline Epoxy

Silicone-modified Phenolic Resin: Relationships Between Molecular Structure and Curing Behavior

Cure Kinetics of an Epoxy Resin Containing Naphthyl/dicyclopentadiene Moieties and Bis‐phenoxy (3‐hydroxy) Phosphine Oxide System and Properties of Its Cured Polymer

Preparation of liquid polycarbosilane containing vinyl ether group and its rapid curing through thiol‐ene click reaction

Curing polycondensation kinetics of multi-silanol

Catalytic Thermocuring and Synergistic Photothermocuring of Single-Component Acrylate-Grafted Liquid Oligosilazanes

The Preparation of Acryloxyl Group Functionalized Siloxane Polymers and the Study of Their Ultra Violet Curing Properties

Synthesis and Characterization of Grafted Silicone Polycarbonates

Phenylethynyl and Phenol End-Capping Studies of Polybiphenyloxydiphenylsilanes for Cross-Linking and Enhanced Thermal Stability

Curing and thermal behavior of epoxy resin in the presence of silicon-containing amide amines

Study on the chemical modification of epoxy/anhydride thermosets using a hydroxyl terminated hyperbranched polymer

Curing kinetics and thermal properties of [2,2] paracyclophane/bisphthalonitrile-terminated imide resins

NON-ISOTHERMAL CURE KINETICS OF MESOGEN-JACKETED LIQUID CRYSTAL POLYMER PBPCS MODIFIED EPOXY RESIN

Hydrolysis and condensation of a benzocyclobutene-functionalized precursor for the synthesis of high performance low-K polymers (vol 7, pg 14406, 2017)

Catalyzed HTPB/HDI-Trimer Curing Reactions and Influence on Pot Life

Rapid curing of polysilazane coatings at room temperature via chloride-catalyzed hydrolysis/condensation reactions