Abstract:Poly (styrene-co-acrylic acid) (PSA )/MgCl2 complex was coated on TiCl3 catalyst (SLC-S catalyst) supported on SiO2 using sol-gel method,and the Ziegler-Natta hybrid catalysts were prepared.The resulting catalysts were characterized by a series of techniques,namely Fourier transform infrared spectroscopy (FTIR),laser scattering particle analyzer and scanning electronic microscopy (SEM).It was found that the hybrid catalysts had a core-shell structure and the thicknesses of membrane of HC-5 (PSA/SLC-S = 5 wt% ) catalyst and HC-20 (PSA/SLC-S = 20 wt% ) catalyst were 1.5 and 3 μm,respectively.Three different kinds of catalysts were used for gas phase ethylene polymerization.The effects of thickness of the membrane in hybrid catalysts on the activity and the profile of the polymerization kinetic curves of the catalysts were investigated.The results indicated that the HC-20 catalyst had a good ethylene polymerization activity and its kinetic curve was stable with an inductive period,while HC-5 catalyst demonstrated a fast decay during polymerization and its activity and kinetic curve both resembled the traditional TiCl3 catalyst.Besides,the properties of the polyethylene made by hybrid catalysts under different hydrogen contents were obtained.It is obvious that the thickness of membranes could affect the hydrogen response of the hybrid catalysts and the molecular weight distribution of the resultant polyethylene.

Catalytic Thermocuring and Synergistic Photothermocuring of Single-Component Acrylate-Grafted Liquid Oligosilazanes

Synthesis and Photopolymerization Kinetics of a Novel Monomer: 1,4-Butanediol Bis(alpha-Trimethylsiloxyacrylate): Steric Effect of the alpha-Trimethylsiloxy Substituent on the Reaction Kinetics

Novel Diacetylinic Aryloxysilane Polymers: A New Thermally Cross-Linkable High Temperature Polymer System

ETHYLENE POLYMERIZATION WITH CORE-SHELL ZIEGLER-NATTA HYBRID CATALYSTS

Preparation, cure kinetics, and thermal properties of novel acetylene terminated silazanes

Synthesis, Characterization and Oxidation Behavior of A Novel Curable Liquid Polysilane Precursors for C/C-Sic Composite

Synthesis and Properties of Arylacetylene Resins with Siloxane Units

Synthesis Characterization and Properties of Novel Latent Thermal Catalyst for Epoxy Resin

Preparation of Alkynyls Terminated POSS and Its Modification of Poly(silicane arylacetylene) Resin

Preparation and Characterization of Cyano-Silicon-Containing Arylacetylene Resins and Their Composites: Dual Enhancement Strategy Involving Physical Interfacial Interactions and Chemical Crosslinking

Thermal stability of the copolymers of silicon-containing arylacetylene resin and acetylene-functional benzoxazine

Synthesis and application of adhesion promoter containing phenolic hydroxyl/acrylate groups for addition-cure liquid silicone rubber

Synthesis and Characterization of Sar/Sio2 Hybrid Materials with High Thermal Stability

Synthesis and Characterization of Poly(arylacetylene)Resins Containing Methylsilylene Groups

Thermal stability of blends of polysilane and silicon-containing arylacetylene resin

Curing reactions of liquid hydridopolycarbosilanes with vinyl or allyl groups

Synthesis and properties of silicon‐containing arylacetylene resins with polyhedral oligomeric silsesquioxane

PEG-assisted Synthesis of Highly Dispersed Cs/Zr-SiO2 Catalyst for Aldol Condensation of Methyl Acetate with Formaldehyde

Thermal curing mechanisms and cross-linking network structure of a novel silicon-containing arylacetylene resin with 2,7-diethynylnaphthalene unit

Synthesis and Characterization of Highly Oxidative Resistant Silicon–acetylene Hybrid Resin Grafted with Modified Mesoporous Silica

Single-source-precursor synthesis and characterization of SiAlC(O) ceramics from a hyperbranched polyaluminocarbosilane