Abstract:Additive Manufacturing (AM) is one of the important technological pillars of Industry 4.0. Thanks to its tool-free manufacturing and extreme flexibility, AM has the potential to respond to individual customer preferences with a customized final product. Nevertheless, the size of 3D printed products is limited by the size of the build chamber of commercially available printers. In addition, deformations, stability, tolerances, and especially cost are highly dependent on the maximum size of the parts. Therefore, a larger final product can only be realized as an assembly group. Therefore, adhesive bonding appears to be an attractive solution for assembling parts made by AM. In this paper, a comparison of the influence of surface texture on the shear strength of 3D-printed metallic and polymeric adhesive joints was performed. A fish scale (FS) bio-inspired surface texture was chosen to examine how surface patterning influences the strength of joints. Fused deposition modeling (FDM) and selective laser melting (SLM) techniques were used to produce polycarbonate (PC) and stainless steel (17-4 PH) specimens, respectively. The effect of bio-surface and material type on the shear strength of adhesive joints was assessed using the ASTM D4501 standardized block shear testing method. The morphological analysis revealed that FDM exhibits reduced resolution and accuracy, making it less suitable for the additive manufacturing of complex surface features in 3D-printed parts when compared to SLM technology. In addition, bio-surface texturing significantly improved the wettability of stainless steel, requiring the synergy of higher surface free energy and increased surface roughness (FS bio-surface) for super-hydrophilicity, while a combination with lower surface free energy (PC material) and the same surface roughness resulted in hydrophobic behavior. On the other hand, the bio-surface texture greatly enhanced the shear strength (+31%) of stainless steel specimens, compared to PC specimens, due to the increase of physical adsorption forces and the enhancement of the mechanical interlocking effect. The analysis of variance (ANOVA) results highlight the predominant influence of material type on surface wettability (84%), while surface texture has a more pronounced impact on the shear strength of bonded joints (71%).

Mechanical behavior of macroscopic interfaces for 3D printed multi-material samples made of dissimilar materials

Interfacial Bonding During Multi-Material Fused Deposition Modeling (FDM) Process Due to Inter-Molecular Diffusion

Mechanical properties of additively manufactured multi-material stiff-soft interfaces: Guidelines to manufacture complex interface composites with tunable properties

Enhancing interlaminar adhesion in multi-material 3D printing: A study of conductive PLA and TPU interfaces through fused filament fabrication

The effect of material mixing on interfacial stiffness and strength of multi-material additive manufacturing

Tensile properties of 3D printed structures of polylactide with thermoplastic polyurethane

Study of the adhesion between TPU and PLA in multi-material 3D printing

Systematic Evaluation of Adhesion and Fracture Toughness in Multi-Material Fused Deposition Material Extrusion

Evolution of microstructure and thermo‐mechanical attributes of fiber reinforced polyamide during fused deposition modeling 3D printing: A comprehensive characterization study

Cooperative enhancement of multi-material interface strength by mechanical interlocking structures and FDM path planning

The Influence of 3D Printing Parameters on Adhesion between Polylactic Acid (PLA) and Thermoplastic Polyurethane (TPU)

Interfacial Fracture of 3D-Printed Bioresorbable Polymers

The Influence of 3D Printing Parameters on the Mechanical Behavior of PLA

Determination of Influencing Factors on Interface Strength of Additively Manufactured Multi-Material Parts by Material Extrusion

An Investigation of Tensile, Fatigue, and Fracture Behavior of 3D-Printed Polymers

Mechanical properties of 3D printed polylactic acid elements: Experimental and numerical insights

Optimization of 3D Printing Parameters for Enhanced Surface Quality and Wear Resistance

Post-processing in multi-material 3D printing

Study of the effect of bio-inspired surface texture on the shear strength of bonded 3D-printed materials: Comparison between stainless steel and polycarbonate joints

Adhesive bonding of similar/dissimilar three-dimensional printed parts (ABS/PLA) considering joint design, surface treatments, and adhesive types

Modeling the fracture behavior of 3D-printed PLA as a laminate composite: Influence of printing parameters on failure and mechanical properties