Abstract:Additive Manufacturing (AM) is one of the important technological pillars of Industry 4.0. Thanks to its tool-free manufacturing and extreme flexibility, AM has the potential to respond to individual customer preferences with a customized final product. Nevertheless, the size of 3D printed products is limited by the size of the build chamber of commercially available printers. In addition, deformations, stability, tolerances, and especially cost are highly dependent on the maximum size of the parts. Therefore, a larger final product can only be realized as an assembly group. Therefore, adhesive bonding appears to be an attractive solution for assembling parts made by AM. In this paper, a comparison of the influence of surface texture on the shear strength of 3D-printed metallic and polymeric adhesive joints was performed. A fish scale (FS) bio-inspired surface texture was chosen to examine how surface patterning influences the strength of joints. Fused deposition modeling (FDM) and selective laser melting (SLM) techniques were used to produce polycarbonate (PC) and stainless steel (17-4 PH) specimens, respectively. The effect of bio-surface and material type on the shear strength of adhesive joints was assessed using the ASTM D4501 standardized block shear testing method. The morphological analysis revealed that FDM exhibits reduced resolution and accuracy, making it less suitable for the additive manufacturing of complex surface features in 3D-printed parts when compared to SLM technology. In addition, bio-surface texturing significantly improved the wettability of stainless steel, requiring the synergy of higher surface free energy and increased surface roughness (FS bio-surface) for super-hydrophilicity, while a combination with lower surface free energy (PC material) and the same surface roughness resulted in hydrophobic behavior. On the other hand, the bio-surface texture greatly enhanced the shear strength (+31%) of stainless steel specimens, compared to PC specimens, due to the increase of physical adsorption forces and the enhancement of the mechanical interlocking effect. The analysis of variance (ANOVA) results highlight the predominant influence of material type on surface wettability (84%), while surface texture has a more pronounced impact on the shear strength of bonded joints (71%).

Study of the effect of bio-inspired surface texture on the shear strength of bonded 3D-printed materials: Comparison between stainless steel and polycarbonate joints

Effect of bio-inspired surface texture on the resistance of 3D-printed polycarbonate bonded joints

Experimental and numerical study on mechanical behavior of 3D printed adhesive joints with polycarbonate substrates

Mechanical strength of adhesively bonded joints using polymeric additive manufacturing

Polymer-Metal Adhesion of Single-Lap Joints Using Fused Filament Fabrication Process: Aluminium with Carbon Fiber Reinforced Polyamide

Effect of surface texture on the mechanical performance of bonded joints: a review

The Effect of Surface Substrate Treatments on the Bonding Strength of Aluminium Inserts with Glass-Reinforced Poly(phenylene) Sulphide

Effect of Metal Surface Topography on the Interlaminar Shear and Tensile Strength of Aluminum/Polyamide 6 Polymer-Metal-Hybrids

Additive manufacturing of metal-polymer hybrid parts: the influence of as-printed LPBF surface roughness on the joint strength

Adhesive bonding of similar/dissimilar three-dimensional printed parts (ABS/PLA) considering joint design, surface treatments, and adhesive types

Influence of Sanding and Plasma Treatment on Shear Bond Strength of 3D-Printed PEI, PEEK and PEEK/CF

On the Effects of Process Parameters and Optimization of Interlaminate Bond Strength in 3D Printed ABS/CF-PLA Composite

Effect of adhesive thickness and surface roughness on the shear strength of aluminium one-component polyurethane adhesive single-lap joints for automotive applications

Influence оf Surface Preparation of Aluminum Alloy AW-5754 аnd Stainless Steel X5CRNI18-10 оn the Properties оf Bonded Joints

Loading-rate effect on tensile and bending strength of 3D-printed polylactic acid adhesively bonded joints

Mechanical Strength of Additive Manufactured and Standard Polymeric Components Joined Through Structural Adhesives

Enhancing the interfacial bonding strength between 3D-printed aluminium substrates and carbon fibre–reinforced polymers

Mechanical behavior investigation of fused deposition modeling joints by using different bonding geometry with variable adhesive thickness

Enhancing shear strength in 3D printed single lap composite joints: A multi‐faceted exploration of GNP integration, print orientation, utilizing artificial neural networks, and dynamic analysis

Strength improvement and failure analysis of dissimilar FDM printed single-lap joints with tailored interface geometry

The effects of material type and temperature factors on the adhesive bonding strength of 3D printed multi-material plastic structures