Abstract:The dual-cylinder opposed linear compressor (DOLC) contains a couple of symmetrical gas loads on the two sides of the movement components. Because the gas loads are symmetrical, the balanced position of movement components will not be offset by gas force during the operating process, and piston displacement can be detected and controlled more easily. Based on the kinetics and thermodynamics theory, the non-linear gas load of the DOLC was linearized by the Fourier method. The relationship between the supply voltage and displacement is presented. Through air compression experiments, the operation features of the DOLC with different syntonic spring groups were analyzed. The performance of the DOLC was considerably affected by work conditions and the stiffness of syntonic spring groups; the closer the work condition was to the sympathetic vibration, the higher the observed efficiency of the DOLC. A jump, hysteresis, and an unstable phenomenon in the process of voltage regulation occurred around sympathetic vibration conditions. In the process of increasing voltage on a certain discharge pressure condition, the displacement jump phenomenon occurred when the intrinsic frequency approacheds power frequency, causing the discharge pressure to drop synchronously. In the process of decreasing voltage on the lower discharge pressure condition, the displacement shrink phenomenon occurred when the intrinsic frequency approached power frequency. Because sympathetic vibration conditions changed with discharge pressures, a hysteresis district existed between the displacement jump point and shrink point. The DOLC worked unstably on the hysteresis district because the discharge pressure fluctuated between the two values. To make the DOLC work stably on higher efficiency, the intrinsic frequency should be configured to a slightly larger value than the power frequency by setting the syntonic spring groups and the mass of movement components to the ratings on the work conditions. Controlling the power frequency after is needed to adhere to the intrinsic frequency of the variable work conditions.

Research on precise control of piston eccentricity by electromagnetic levitation in labyrinth piston compressor

Research on Piston Assemble Precise Guiding Technology of Labyrinth-piston Compressor---The Accurate Electromagnetic Guiding Technology

Research on the Piston Precise Electromagnetic Centering of Labyrinth-Piston Compressor

Investigation on the Electromagnetic Centring Technique in Compressor with Labyrinth Seal Structure

Research on dynamic modeling and electromagnetic force centering of piston/piston rod system for labyrinth piston compressor

Implementation of Active Magnetic Control System for Piston Centering in Labyrinth Piston Compressor

Dynamic Research of Piston/piston Assembly in Labyrinth Reciprocating Compressor

Research of Transverse Dynamic Oscillation for the Piston in Labyrinth Compressor

Research on Micron Electrohydraulic Position Feedback Control System

Analysis on Leakage Characteristics of Labyrinth Piston Clearance in Reciprocating Labyrinth Compressor

Self-Sencing Control Research on a Linear Compressor

Optimization study of low lateral force in eccentric ball-piston pumps

Axial Active-Passive Suspension Electromagnetic System in Radial Air Gap for the Maglev Pump.

Experimental Investigation on the Steady-State Performance and Piston Stroke Length Control of A Variable Displacement Wobble Plate Compressor

Rectangular Thrust Control Methods of PMLSM for Stroke and Dead Centers Tracking of Free-Piston Linear Generator

A centrifugal force interaction analysis on the piston/cylinder interface leakage of bent-axis type piston pumps

Leakage Characteristic Identification of Labyrinth Seals on Reciprocating Piston Through Transient Simulations

Study of the moving offset characteristics of multi-loop moving coil linear compressor

Numerical Investigation on the Effects of Structural Parameters of Labyrinth Cavity on Sealing Performance

Experimental study of DC excitation effect on the performance of moving coil linear compressor

Experimental Investigation and Performance Analysis of a Dual-Cylinder Opposed Linear Compressor